Clearance

DIFtech Brake Master Cylinder for 240SX w/ 300zx Calipers non-ABS S13 S14 10087 - Diftech

Sale Sold Out

DIFtech Brake Master Cylinder for 240SX w/ 300zx Calipers non-ABS S13 S14 10087 {"id":5403952646,"title":"DIFtech Brake Master Cylinder for 240SX w\/ 300zx Calipers non-ABS S13 S14 10087","handle":"tokico-nissan-z32-300zx-brake-master-cylinder-upgrade-for-240sx-1308","description":"\u003cp\u003eDIF is proud to present a brake master cylinder upgrade for 240SX using 300ZX brake calipers. This Z32 master cylinder upgrade will provide proper brake bias for cars using Z32 calipers. It will move more fluid w\/ less pressure allowing the master cylinder to move the 26mm or 30mm front 300ZX 4 piston calipers efficiently. Pedal feel will greatly improve giving the driver better pedal modulation. For the ultimate brake upgrade, use this BMC with an Automatic 240SX Brake Booster or a 300ZX Brake Booster, and all around 300ZX brakes with stainless steel brake lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does this BMC help? Here's how it works:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSince 4 piston calipers are more responsive and require \u003cu\u003eless\u003c\/u\u003e pressure to work efficiently, they will need a \u003cu\u003ebigger\u003c\/u\u003e BMC piston. \u003cu\u003eSmall\u003c\/u\u003e piston diameter gives \u003cu\u003emore\u003c\/u\u003e pressure versus bigger piston diameter. If the calipers are forced with too much pressure, they will lock up too quickly giving the driver no room for modulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIF sources only the highest quality master cylinders available and modifies them for proper non-ABS fitting configuration. The 17\/16\" (27mm) piston diameter was selected to give drivers the most responsive pedal feel for both street and track use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eAll flared fittings are preinstalled for a reliable, leak free operation. This master cylinder is for non-ABS equiped cars requiring three fittings. Please take care to order the correct master cylinder for your application.\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003eLEFT HAND DRIVE\u003c\/strong\u003e vehicles only.\u003c\/p\u003e\n\u003cp\u003eNOTE: Conversion to a Z32 master cylinder requires bending of the chassis hard brake lines or installation of a Z32 hard line conversion kit.\u003c\/p\u003e\n\u003cp\u003e** Images shown may vary from actual product. **\u003c\/p\u003e","published_at":"2016-03-16T13:22:00-07:00","created_at":"2016-03-16T13:22:26-07:00","vendor":"DIFtech","type":"Brake Master Cylinder","tags":["240SX","300ZX","Nissan","S13","S14","Z32"],"price":16000,"price_min":16000,"price_max":16000,"available":false,"price_varies":false,"compare_at_price":19000,"compare_at_price_min":19000,"compare_at_price_max":19000,"compare_at_price_varies":false,"variants":[{"id":16883622470,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10087","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Brake Master Cylinder for 240SX w\/ 300zx Calipers non-ABS S13 S14 10087","public_title":null,"options":["Default Title"],"price":16000,"weight":1293,"compare_at_price":19000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395683475","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/1308_DIF_10087_FS01-01_2x1446877887563d9abf2290e.jpeg?v=1571609571"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/1308_DIF_10087_FS01-01_2x1446877887563d9abf2290e.jpeg?v=1571609571","options":["Title"],"media":[{"alt":"DIFtech Brake Master Cylinder for 240SX w\/ 300zx Calipers non-ABS S13 S14 10087 - Diftech","id":2200324866111,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/diftech.com\/cdn\/shop\/products\/1308_DIF_10087_FS01-01_2x1446877887563d9abf2290e.jpeg?v=1571609571"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/1308_DIF_10087_FS01-01_2x1446877887563d9abf2290e.jpeg?v=1571609571","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDIF is proud to present a brake master cylinder upgrade for 240SX using 300ZX brake calipers. This Z32 master cylinder upgrade will provide proper brake bias for cars using Z32 calipers. It will move more fluid w\/ less pressure allowing the master cylinder to move the 26mm or 30mm front 300ZX 4 piston calipers efficiently. Pedal feel will greatly improve giving the driver better pedal modulation. For the ultimate brake upgrade, use this BMC with an Automatic 240SX Brake Booster or a 300ZX Brake Booster, and all around 300ZX brakes with stainless steel brake lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does this BMC help? Here's how it works:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSince 4 piston calipers are more responsive and require \u003cu\u003eless\u003c\/u\u003e pressure to work efficiently, they will need a \u003cu\u003ebigger\u003c\/u\u003e BMC piston. \u003cu\u003eSmall\u003c\/u\u003e piston diameter gives \u003cu\u003emore\u003c\/u\u003e pressure versus bigger piston diameter. If the calipers are forced with too much pressure, they will lock up too quickly giving the driver no room for modulation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIF sources only the highest quality master cylinders available and modifies them for proper non-ABS fitting configuration. The 17\/16\" (27mm) piston diameter was selected to give drivers the most responsive pedal feel for both street and track use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eAll flared fittings are preinstalled for a reliable, leak free operation. This master cylinder is for non-ABS equiped cars requiring three fittings. Please take care to order the correct master cylinder for your application.\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003eLEFT HAND DRIVE\u003c\/strong\u003e vehicles only.\u003c\/p\u003e\n\u003cp\u003eNOTE: Conversion to a Z32 master cylinder requires bending of the chassis hard brake lines or installation of a Z32 hard line conversion kit.\u003c\/p\u003e\n\u003cp\u003e** Images shown may vary from actual product. **\u003c\/p\u003e"}

$ 190.00 $ 160.00

DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733 - Diftech

Sale Sold Out

DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733 {"id":1327500656744,"title":"DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733","handle":"diftech-10733-eccentric-bolt-lockout-kit-fits-scion-fr-s-subaru-brz-rear","description":"\u003cspan\u003eThis rear alignment lockout kit for the Toyota 86 chassis is designed to convert your factory eccentric bolts to a fixed point when running adjustable camber arms without fear of adjustments slipping. In addition, unlike other lockout kits on the market, these are offset to either limit of the factory allowances for enthusiasts running extreme alignments on lowered cars, or for those concerned about arm lengths and geometry. Sold as a pair including lockout washers, bolts and lock nuts. Works on the FR-S, BRZ, or 86 forward lower link of the rear suspension.\u003c\/span\u003e","published_at":"2018-06-07T13:33:38-07:00","created_at":"2018-06-07T13:34:00-07:00","vendor":"DIFtech","type":"Eccentric Bolt Lockout Kit","tags":["86","BRZ","FR-S","Scion","Subaru","Toyota"],"price":3800,"price_min":3800,"price_max":3800,"available":false,"price_varies":false,"compare_at_price":4400,"compare_at_price_min":4400,"compare_at_price_max":4400,"compare_at_price_varies":false,"variants":[{"id":12223590236264,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10733","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733","public_title":null,"options":["Default Title"],"price":3800,"weight":340,"compare_at_price":4400,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686872","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_0ba578a5-978f-4881-9c58-8ec429d02001.jpg?v=1571609579","\/\/diftech.com\/cdn\/shop\/products\/image_70c2a9fb-e1ad-413a-8ffc-a72df3ce0802.jpg?v=1571609579"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_0ba578a5-978f-4881-9c58-8ec429d02001.jpg?v=1571609579","options":["Title"],"media":[{"alt":"DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733 - Diftech","id":3092358955071,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1767,"width":2358,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_0ba578a5-978f-4881-9c58-8ec429d02001.jpg?v=1571609579"},"aspect_ratio":1.334,"height":1767,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_0ba578a5-978f-4881-9c58-8ec429d02001.jpg?v=1571609579","width":2358},{"alt":"DIFtech Eccentric Bolt Lockout Kit for Scion FR-S Subaru BRZ 86 Rear Toe 10733 - Diftech","id":3092358987839,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_70c2a9fb-e1ad-413a-8ffc-a72df3ce0802.jpg?v=1571609579"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_70c2a9fb-e1ad-413a-8ffc-a72df3ce0802.jpg?v=1571609579","width":3264}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cspan\u003eThis rear alignment lockout kit for the Toyota 86 chassis is designed to convert your factory eccentric bolts to a fixed point when running adjustable camber arms without fear of adjustments slipping. In addition, unlike other lockout kits on the market, these are offset to either limit of the factory allowances for enthusiasts running extreme alignments on lowered cars, or for those concerned about arm lengths and geometry. Sold as a pair including lockout washers, bolts and lock nuts. Works on the FR-S, BRZ, or 86 forward lower link of the rear suspension.\u003c\/span\u003e"}

$ 44.00 $ 38.00

DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech

Sale Sold Out

DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 {"id":9251598476,"title":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626","handle":"na-nb-miata-extended-top-hat","description":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata 1990-2005, NA or NB chassis\u003c\/li\u003e\n\u003cli\u003eUses stock bushings for ease of install and ride comfort\u003c\/li\u003e\n\u003cli\u003eConverts to accept 60mm linear spring\u003c\/li\u003e\n\u003cli\u003eOne pair fits front or rear\u003c\/li\u003e\n\u003cli\u003eIncrease compression stroke by 1.in (26mm) compared to stock\u003c\/li\u003e\n\u003cli\u003eMachined from 6061-T6 billet aluminum for light weight and high strength\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eTo be used with slip-on threaded collars on stock-type shocks\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended top hats are designed to complete your conversion to an affordable coilover setup on any NA or NB Miata while allowing additional compression stroke for lowered cars. This top hat design integrates a 60mm spring retainer into the hat to allow you to use a linear race spring when using slip-on, threaded collars. Spring isolators can also be used to adapt to a 65mm spring. In addition, the raised design allows the shock body to be tucked higher into the body of the car, allowing more compression before hitting the bump stops. This kit is for use with stock bushings and bump stops, so ride comfort and noise remain unchanged.\u003c\/p\u003e\n\u003cp\u003eSimilar mounts on the market are usually welded steel and have been known to be made to loose tolerances. These billet CNC machined hats offer a clean, professional solution that look great and work as good as they look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNot designed for use with stock or stock-type springs. For use on threaded body shocks or shocks with threaded collars and a 60mm linear race spring.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor use with NA Miata bilstein shocks, use shoulder nut 10621 to reach into the bushing and threads because the threads are not long enough on NA shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum.\u003c\/p\u003e","published_at":"2016-12-21T20:06:08-08:00","created_at":"2016-12-21T20:06:08-08:00","vendor":"DIFtech","type":"Top Hat","tags":["Mazda","Miata MX-5","NA","NB"],"price":16000,"price_min":16000,"price_max":16000,"available":false,"price_varies":false,"compare_at_price":18000,"compare_at_price_min":18000,"compare_at_price_max":18000,"compare_at_price_varies":false,"variants":[{"id":32045258764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10626","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626","public_title":null,"options":["Default Title"],"price":16000,"weight":907,"compare_at_price":18000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395685790","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","options":["Title"],"media":[{"alt":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech","id":2488740905023,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1836,"width":2447,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575"},"aspect_ratio":1.333,"height":1836,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","width":2447},{"alt":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech","id":2488741003327,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2220,"width":2959,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575"},"aspect_ratio":1.333,"height":2220,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575","width":2959}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata 1990-2005, NA or NB chassis\u003c\/li\u003e\n\u003cli\u003eUses stock bushings for ease of install and ride comfort\u003c\/li\u003e\n\u003cli\u003eConverts to accept 60mm linear spring\u003c\/li\u003e\n\u003cli\u003eOne pair fits front or rear\u003c\/li\u003e\n\u003cli\u003eIncrease compression stroke by 1.in (26mm) compared to stock\u003c\/li\u003e\n\u003cli\u003eMachined from 6061-T6 billet aluminum for light weight and high strength\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eTo be used with slip-on threaded collars on stock-type shocks\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended top hats are designed to complete your conversion to an affordable coilover setup on any NA or NB Miata while allowing additional compression stroke for lowered cars. This top hat design integrates a 60mm spring retainer into the hat to allow you to use a linear race spring when using slip-on, threaded collars. Spring isolators can also be used to adapt to a 65mm spring. In addition, the raised design allows the shock body to be tucked higher into the body of the car, allowing more compression before hitting the bump stops. This kit is for use with stock bushings and bump stops, so ride comfort and noise remain unchanged.\u003c\/p\u003e\n\u003cp\u003eSimilar mounts on the market are usually welded steel and have been known to be made to loose tolerances. These billet CNC machined hats offer a clean, professional solution that look great and work as good as they look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNot designed for use with stock or stock-type springs. For use on threaded body shocks or shocks with threaded collars and a 60mm linear race spring.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor use with NA Miata bilstein shocks, use shoulder nut 10621 to reach into the bushing and threads because the threads are not long enough on NA shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum.\u003c\/p\u003e"}

$ 180.00 $ 160.00

Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732 - Diftech

Sale Sold Out

Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732 {"id":1327497707624,"title":"Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732","handle":"diftech-10732-eccentric-bolt-lockout-kit-fits-nissan-350z-rear","description":"\u003cp\u003eThis rear alignment lockout kit for the Nissan Z33 and Z34 chassis is designed to convert your factory eccentric bolts to a fixed point when running adjustable camber arms without fear of adjustments slipping. In addition, unlike other lockout kits on the market, these are offset to either limit of the factory allowances for enthusiasts running extreme alignments on lowered cars, or for those concerned about arm lengths and geometry. Sold as a pair including lockout washers, bolts and lock nuts. Works on 350Z or 370Z for either camber or toe arms.\u003c\/p\u003e","published_at":"2018-06-07T12:57:04-07:00","created_at":"2018-06-07T13:02:25-07:00","vendor":"DIFtech","type":"Eccentric Bolt Lockout Kit","tags":["350Z","370Z","Nismo","Nissan","Z33","Z34"],"price":3500,"price_min":3500,"price_max":3500,"available":false,"price_varies":false,"compare_at_price":4000,"compare_at_price_min":4000,"compare_at_price_max":4000,"compare_at_price_varies":false,"variants":[{"id":12223582929000,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10732","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732","public_title":null,"options":["Default Title"],"price":3500,"weight":318,"compare_at_price":4000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686865","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_ccb795cd-2f34-4c3e-b7ca-134103e207ee.jpg?v=1571609579","\/\/diftech.com\/cdn\/shop\/products\/image_e87a1ddc-2d93-4f95-bf64-fa92089158d8.jpg?v=1571609579"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_ccb795cd-2f34-4c3e-b7ca-134103e207ee.jpg?v=1571609579","options":["Title"],"media":[{"alt":"Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732 - Diftech","id":3092358234175,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1574,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_ccb795cd-2f34-4c3e-b7ca-134103e207ee.jpg?v=1571609579"},"aspect_ratio":1.334,"height":1574,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_ccb795cd-2f34-4c3e-b7ca-134103e207ee.jpg?v=1571609579","width":2100},{"alt":"Diftech Eccentric Bolt Lockout Kit for Nissan 350Z 370Z Rear Z33 Z34 10732 - Diftech","id":3092358299711,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_e87a1ddc-2d93-4f95-bf64-fa92089158d8.jpg?v=1571609579"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_e87a1ddc-2d93-4f95-bf64-fa92089158d8.jpg?v=1571609579","width":3264}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis rear alignment lockout kit for the Nissan Z33 and Z34 chassis is designed to convert your factory eccentric bolts to a fixed point when running adjustable camber arms without fear of adjustments slipping. In addition, unlike other lockout kits on the market, these are offset to either limit of the factory allowances for enthusiasts running extreme alignments on lowered cars, or for those concerned about arm lengths and geometry. Sold as a pair including lockout washers, bolts and lock nuts. Works on 350Z or 370Z for either camber or toe arms.\u003c\/p\u003e"}

$ 40.00 $ 35.00

DIFtech Inner Tie Rods for Nissan 240SX Pair Included Rack Spacers S14 S15 10775 - Diftech

Sale Sold Out

DIFtech Inner Tie Rods for Nissan 240SX Pair Included Rack Spacers S14 S15 10775 {"id":1388333891647,"title":"DIFtech Inner Tie Rods for Nissan 240SX Pair Included Rack Spacers S14 S15 10775","handle":"diftech-inner-tie-rod-for-nissan-240sx-s14-s15-10775","description":"\u003cp\u003eThese DIFtech, extra lock inner tie rods for 240SX are designed to give S14 and S15 owners the option of higher steering angle with a\u003cspan\u003e factory finish package\u003c\/span\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eInstalling aftermarket rack spacers onto stock inner tie rods blocks off some of the available thread for installing into the rack. The inner tie rods in this kit extend the spacer geometry without sacrificing thread length and compromising the strength of the inner mounting point.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eThese cars are getting older, tie rods are getting worn out, and quality replacements are getting harder to come by.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThis is a great choice when tightening up the front end of your tired S-Chassis and looking for some extra lock in the process. This kit includes DIFtech's hardened steel inner tie rods with integrated rack spacers. Threaded for S14\/S15 tie rod end.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eFor complete assemblies see 10773.\u003c\/p\u003e","published_at":"2018-08-03T16:09:55-07:00","created_at":"2018-08-03T16:51:57-07:00","vendor":"DIFtech","type":"Inner Tie Rod","tags":["240SX","Nissan","S14","S15"],"price":4500,"price_min":4500,"price_max":4500,"available":false,"price_varies":false,"compare_at_price":5000,"compare_at_price_min":5000,"compare_at_price_max":5000,"compare_at_price_varies":false,"variants":[{"id":12627807862847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10775","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Inner Tie Rods for Nissan 240SX Pair Included Rack Spacers S14 S15 10775","public_title":null,"options":["Default Title"],"price":4500,"weight":1524,"compare_at_price":5000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687374","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10772_10775_7b59e761-6171-4a60-ae0d-05f1a84ee67b.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10772_10775_7b59e761-6171-4a60-ae0d-05f1a84ee67b.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Inner Tie Rods for Nissan 240SX Pair Included Rack Spacers S14 S15 10775 - Diftech","id":3183805333567,"position":1,"preview_image":{"aspect_ratio":1.358,"height":265,"width":360,"src":"\/\/diftech.com\/cdn\/shop\/products\/10772_10775_7b59e761-6171-4a60-ae0d-05f1a84ee67b.jpg?v=1571609580"},"aspect_ratio":1.358,"height":265,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10772_10775_7b59e761-6171-4a60-ae0d-05f1a84ee67b.jpg?v=1571609580","width":360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThese DIFtech, extra lock inner tie rods for 240SX are designed to give S14 and S15 owners the option of higher steering angle with a\u003cspan\u003e factory finish package\u003c\/span\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eInstalling aftermarket rack spacers onto stock inner tie rods blocks off some of the available thread for installing into the rack. The inner tie rods in this kit extend the spacer geometry without sacrificing thread length and compromising the strength of the inner mounting point.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eThese cars are getting older, tie rods are getting worn out, and quality replacements are getting harder to come by.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThis is a great choice when tightening up the front end of your tired S-Chassis and looking for some extra lock in the process. This kit includes DIFtech's hardened steel inner tie rods with integrated rack spacers. Threaded for S14\/S15 tie rod end.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eFor complete assemblies see 10773.\u003c\/p\u003e"}

$ 50.00 $ 45.00

DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1" - Universal 10674 - Diftech

Sale Sold Out

DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1" - Universal 10674 {"id":126973935643,"title":"DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1\" - Universal 10674","handle":"weldable-blow-off-valve-recirculating-port-25-4mm-1-universal","description":"\u003cul\u003e\n\u003cli\u003eFits 1\" tubing\u003c\/li\u003e\n\u003cli\u003eBeaded profile for secure retention of hose\u003c\/li\u003e\n\u003cli\u003eCross notched for easy welding\u003c\/li\u003e\n\u003cli\u003eWeldable 6061 Aluminum construction\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese universal recirculating ports give fabricators a simple and cost-effective option when it comes to piping in a recirculating blow off valve port. These recirc ports are CNC machined to precisely fit your tubing size and notched for ease of weldment to the intake pipe. No need to run tubing size adapters when your BOV side port doesn't match your intake side port. No reason to buy a long bar of tubing when you only need a couple inches. No need to cut, notch, or bead roll. Just drill the hole in your intake pipe and weld in the proper size recirc port. Done!\u003c\/p\u003e\n\u003cp\u003eThis listing is for use with 1\" blow off valves and intake hose.\u003c\/p\u003e","published_at":"2017-09-27T16:21:58-07:00","created_at":"2017-09-27T16:23:17-07:00","vendor":"DIFtech","type":"BOV Recirculating Port","tags":["Universal"],"price":1000,"price_min":1000,"price_max":1000,"available":false,"price_varies":false,"compare_at_price":1500,"compare_at_price_min":1500,"compare_at_price_max":1500,"compare_at_price_varies":false,"variants":[{"id":1376913260571,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10674","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1\" - Universal 10674","public_title":null,"options":["Default Title"],"price":1000,"weight":113,"compare_at_price":1500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686278","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_6dd6d022-a4ab-4833-ad86-2b036464f3be.jpg?v=1579782571","\/\/diftech.com\/cdn\/shop\/products\/image_c90602d3-cc34-4779-a5c6-769bc0a5ac6f.jpg?v=1579782571"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_6dd6d022-a4ab-4833-ad86-2b036464f3be.jpg?v=1579782571","options":["Title"],"media":[{"alt":"DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1\" - Universal 10674 - Diftech","id":2664943091775,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1392,"width":1857,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_6dd6d022-a4ab-4833-ad86-2b036464f3be.jpg?v=1579782571"},"aspect_ratio":1.334,"height":1392,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_6dd6d022-a4ab-4833-ad86-2b036464f3be.jpg?v=1579782571","width":1857},{"alt":"DIFtech Weldable Blow Off Valve Recirculating Port - 25.4mm 1\" - Universal 10674 - Diftech","id":2664943124543,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1354,"width":1805,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_c90602d3-cc34-4779-a5c6-769bc0a5ac6f.jpg?v=1579782571"},"aspect_ratio":1.333,"height":1354,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_c90602d3-cc34-4779-a5c6-769bc0a5ac6f.jpg?v=1579782571","width":1805}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits 1\" tubing\u003c\/li\u003e\n\u003cli\u003eBeaded profile for secure retention of hose\u003c\/li\u003e\n\u003cli\u003eCross notched for easy welding\u003c\/li\u003e\n\u003cli\u003eWeldable 6061 Aluminum construction\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese universal recirculating ports give fabricators a simple and cost-effective option when it comes to piping in a recirculating blow off valve port. These recirc ports are CNC machined to precisely fit your tubing size and notched for ease of weldment to the intake pipe. No need to run tubing size adapters when your BOV side port doesn't match your intake side port. No reason to buy a long bar of tubing when you only need a couple inches. No need to cut, notch, or bead roll. Just drill the hole in your intake pipe and weld in the proper size recirc port. Done!\u003c\/p\u003e\n\u003cp\u003eThis listing is for use with 1\" blow off valves and intake hose.\u003c\/p\u003e"}

$ 15.00 $ 10.00

DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677 - Diftech

Sale Sold Out

DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677 {"id":127079448603,"title":"DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677","handle":"weldable-blow-off-valve-recirculating-port-34mm-universal","description":"\u003cul\u003e\n\u003cli\u003eFits 34mm tubing\u003c\/li\u003e\n\u003cli\u003eBeaded profile for secure retention of hose\u003c\/li\u003e\n\u003cli\u003eCross notched for easy welding\u003c\/li\u003e\n\u003cli\u003eWeldable 6061 Aluminum construction\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese universal recirculating ports give fabricators a simple and cost-effective option when it comes to piping in a recirculating blow off valve port. These recirc ports are CNC machined to precisely fit your tubing size and notched for ease of weldment to the intake pipe. No need to run tubing size adapters when your BOV side port doesn't match your intake side port. No reason to buy a long bar of tubing when you only need a couple inches. No need to cut, notch, or bead roll. Just drill the hole in your intake pipe and weld in the proper size recirc port. Done!\u003c\/p\u003e\n\u003cp\u003eThis listing is for use with 34mm blow off valves and intake hose.\u003c\/p\u003e","published_at":"2017-09-27T17:34:29-07:00","created_at":"2017-09-27T17:34:59-07:00","vendor":"DIFtech","type":"BOV Recirculating Port","tags":["Universal"],"price":1000,"price_min":1000,"price_max":1000,"available":false,"price_varies":false,"compare_at_price":1500,"compare_at_price_min":1500,"compare_at_price_max":1500,"compare_at_price_varies":false,"variants":[{"id":1378053226523,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10677","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677","public_title":null,"options":["Default Title"],"price":1000,"weight":113,"compare_at_price":1500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686308","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_c24cd3b6-6871-46e2-9c55-192556c9b5b8.jpg?v=1579782573","\/\/diftech.com\/cdn\/shop\/products\/image_917450f5-1d13-4fe8-b228-50956e796713.jpg?v=1579782573"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_c24cd3b6-6871-46e2-9c55-192556c9b5b8.jpg?v=1579782573","options":["Title"],"media":[{"alt":"DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677 - Diftech","id":2664949317695,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1446,"width":1929,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_c24cd3b6-6871-46e2-9c55-192556c9b5b8.jpg?v=1579782573"},"aspect_ratio":1.334,"height":1446,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_c24cd3b6-6871-46e2-9c55-192556c9b5b8.jpg?v=1579782573","width":1929},{"alt":"DIFtech Weldable Blow Off Valve Recirculating Port - 34mm - Universal 10677 - Diftech","id":2664949350463,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1363,"width":1818,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_917450f5-1d13-4fe8-b228-50956e796713.jpg?v=1579782573"},"aspect_ratio":1.334,"height":1363,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_917450f5-1d13-4fe8-b228-50956e796713.jpg?v=1579782573","width":1818}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits 34mm tubing\u003c\/li\u003e\n\u003cli\u003eBeaded profile for secure retention of hose\u003c\/li\u003e\n\u003cli\u003eCross notched for easy welding\u003c\/li\u003e\n\u003cli\u003eWeldable 6061 Aluminum construction\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese universal recirculating ports give fabricators a simple and cost-effective option when it comes to piping in a recirculating blow off valve port. These recirc ports are CNC machined to precisely fit your tubing size and notched for ease of weldment to the intake pipe. No need to run tubing size adapters when your BOV side port doesn't match your intake side port. No reason to buy a long bar of tubing when you only need a couple inches. No need to cut, notch, or bead roll. Just drill the hole in your intake pipe and weld in the proper size recirc port. Done!\u003c\/p\u003e\n\u003cp\u003eThis listing is for use with 34mm blow off valves and intake hose.\u003c\/p\u003e"}

$ 15.00 $ 10.00

DIFtech Front Brake Lines for Nissan 240SX Stock Braided Stainless Steel 10099 - Diftech

Sale Sold Out

DIFtech Front Brake Lines for Nissan 240SX Stock Braided Stainless Steel 10099 {"id":5403939526,"title":"DIFtech Front Brake Lines for Nissan 240SX Stock Braided Stainless Steel 10099","handle":"front-brake-lines-for-s13-s14-240sx-25620","description":"\u003cp\u003e\u003cstrong\u003eDIF 10099 Replacement Braided Stainless Steel FRONT Brake Lines for S13 S14 240SX\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003e[Factory Original Calipers or Q45 Upgraded Calipers]\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003eStainless Steel Front Brake Line Conversion for S13 S14 240SX for factory original or Q45 Calipers. The stainless steel braided lines will improve brake pressure and response during hard braking. High quality kit and easy to install. Sold in pairs.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eNote: DIF 10099 is for replacing FRONT lines on S13 \u0026amp; S14 - 240SX \u003cu\u003ewith factory original calipers or Q45 Calipers\u003c\/u\u003e. If converted to 300ZX Calipers use DIF 10042.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2016-03-16T13:21:36-07:00","created_at":"2016-03-16T13:21:37-07:00","vendor":"DIFtech","type":"Brake Hydraulic Line","tags":["Nissan","S13","S14"],"price":4000,"price_min":4000,"price_max":4000,"available":false,"price_varies":false,"compare_at_price":5000,"compare_at_price_min":5000,"compare_at_price_max":5000,"compare_at_price_varies":false,"variants":[{"id":16883603782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10099","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Brake Lines for Nissan 240SX Stock Braided Stainless Steel 10099","public_title":null,"options":["Default Title"],"price":4000,"weight":227,"compare_at_price":5000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395683581","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/25620_DIF_10099_FS01-01_2x1446868390563d75a6ac676.jpeg?v=1571609568"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/25620_DIF_10099_FS01-01_2x1446868390563d75a6ac676.jpeg?v=1571609568","options":["Title"],"media":[{"alt":"DIFtech Front Brake Lines for Nissan 240SX Stock Braided Stainless Steel 10099 - Diftech","id":2200322605119,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/diftech.com\/cdn\/shop\/products\/25620_DIF_10099_FS01-01_2x1446868390563d75a6ac676.jpeg?v=1571609568"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/25620_DIF_10099_FS01-01_2x1446868390563d75a6ac676.jpeg?v=1571609568","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDIF 10099 Replacement Braided Stainless Steel FRONT Brake Lines for S13 S14 240SX\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003e[Factory Original Calipers or Q45 Upgraded Calipers]\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003eStainless Steel Front Brake Line Conversion for S13 S14 240SX for factory original or Q45 Calipers. The stainless steel braided lines will improve brake pressure and response during hard braking. High quality kit and easy to install. Sold in pairs.\u003c\/p\u003e\n \u003cp\u003e\u003cstrong\u003eNote: DIF 10099 is for replacing FRONT lines on S13 \u0026amp; S14 - 240SX \u003cu\u003ewith factory original calipers or Q45 Calipers\u003c\/u\u003e. If converted to 300ZX Calipers use DIF 10042.\u003c\/strong\u003e\u003c\/p\u003e"}

$ 50.00 $ 40.00

DIFtech Water Pump Block-Off Plate for Nissan 240SX KA24DE Delete kit 10540 - Diftech

Sale Sold Out

DIFtech Water Pump Block-Off Plate for Nissan 240SX KA24DE Delete kit 10540 {"id":5403954950,"title":"DIFtech Water Pump Block-Off Plate for Nissan 240SX KA24DE Delete kit 10540","handle":"water-pump-delete-block-off-plate-ka24de-59115","description":"\u003cp\u003e\u003cstrong\u003eDIF Water Pump Deletion Plate - Nissan S13\/S14 KA24DE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThisDIF Water Pump Deletion Plate allows for the integration of an electric water pump into the KA24DE engine.\u003c\/p\u003e\n\u003cp\u003eFor extremely high revving engines a more consistent water pump is often recommended. When engines rev' extremely fast their water pumps tend to also rev' at correlating (similar) speeds. The excessively high rotation of the water pump can sometimes lead to cavitation, orthe formation and then immediate implosion of cavities in a liquid - i.e. small liquid-free zones (\"bubbles\") - that are the consequence of forces acting upon the liquid. These bubbles, after prolonged exposure, can harm the engine block or pump propellers. It is because of this electric water pumps are used. They allow for a stable flow of coolant and ignore completeley the rpm's a vehicle is going through. Additionally, an electric water pump reduces parasitic drag on the engine since it would be free of another pulley, ultimately gaining more horsepower.\u003c\/p\u003e\n\u003cp\u003eTheDIF Water Pump Deletion Plate is a perfect compliment to an electric water pump because it will become necessary to block the hole where the pulley-based water pump used to be. This deletion plate is made with extreme precision and fits KA24DE engines perfectly. It is also anodized in Silver for a cleaner, more aesthetic look. All hardware is supplied for an easy install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Electric water pump sold seperately.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2018-03-13T19:53:23-07:00","created_at":"2016-03-16T13:22:34-07:00","vendor":"DIFtech","type":"Water Pump Block-Off Plate","tags":["240SX","KA24DE","Nissan"],"price":8000,"price_min":8000,"price_max":8000,"available":false,"price_varies":false,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":16883625542,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10540","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Water Pump Block-Off Plate for Nissan 240SX KA24DE Delete kit 10540","public_title":null,"options":["Default Title"],"price":8000,"weight":907,"compare_at_price":10000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395684946","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/59115_DIF_10540_FS01-01_2x1446868509563d761d3c84f.jpeg?v=1579782567"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/59115_DIF_10540_FS01-01_2x1446868509563d761d3c84f.jpeg?v=1579782567","options":["Title"],"media":[{"alt":"DIFtech Water Pump Block-Off Plate for Nissan 240SX KA24DE Delete kit 10540 - Diftech","id":2200325161023,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/diftech.com\/cdn\/shop\/products\/59115_DIF_10540_FS01-01_2x1446868509563d761d3c84f.jpeg?v=1579782567"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/59115_DIF_10540_FS01-01_2x1446868509563d761d3c84f.jpeg?v=1579782567","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDIF Water Pump Deletion Plate - Nissan S13\/S14 KA24DE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThisDIF Water Pump Deletion Plate allows for the integration of an electric water pump into the KA24DE engine.\u003c\/p\u003e\n\u003cp\u003eFor extremely high revving engines a more consistent water pump is often recommended. When engines rev' extremely fast their water pumps tend to also rev' at correlating (similar) speeds. The excessively high rotation of the water pump can sometimes lead to cavitation, orthe formation and then immediate implosion of cavities in a liquid - i.e. small liquid-free zones (\"bubbles\") - that are the consequence of forces acting upon the liquid. These bubbles, after prolonged exposure, can harm the engine block or pump propellers. It is because of this electric water pumps are used. They allow for a stable flow of coolant and ignore completeley the rpm's a vehicle is going through. Additionally, an electric water pump reduces parasitic drag on the engine since it would be free of another pulley, ultimately gaining more horsepower.\u003c\/p\u003e\n\u003cp\u003eTheDIF Water Pump Deletion Plate is a perfect compliment to an electric water pump because it will become necessary to block the hole where the pulley-based water pump used to be. This deletion plate is made with extreme precision and fits KA24DE engines perfectly. It is also anodized in Silver for a cleaner, more aesthetic look. All hardware is supplied for an easy install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Electric water pump sold seperately.\u003c\/strong\u003e\u003c\/p\u003e"}

$ 100.00 $ 80.00

DIFtech Gasket Turbo Discharge for Nissan 240SX S13 5-bolt Garrett T25 10758 - Diftech

Sale Sold Out

DIFtech Gasket Turbo Discharge for Nissan 240SX S13 5-bolt Garrett T25 10758 {"id":1542769049663,"title":"DIFtech Gasket Turbo Discharge for Nissan 240SX S13 5-bolt Garrett T25 10758","handle":"diftech-gasket-exhaust-turbo-discharge-5-bolt-garrett-t25-turbos-fits-nissan-240sx-s13-10758","description":"\u003cul\u003e\n\u003cli\u003eFor Garrett T25 series turbo used on S13 chassis\u003c\/li\u003e\n\u003cli\u003eAll metal, multi-layer gasket material\u003c\/li\u003e\n\u003cli\u003e2.0mm (.080\") thick\u003c\/li\u003e\n\u003cli\u003ePrecise OEM-like tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis turbo discharge gasket is made from a superior multi-layer gasket material and precisely cut to OEM part profile. Made to ensure an excellent seal between the turbo and the down pipe on T25 turbos. OEM replacement for SR20DET engines used in the S13 chassis. The extra thickness will ensure a quality seal in high temperature and\/or high boost turbo applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eFor use with S13 factory turbos. For S14 or S15 use T28\/GT specific gasket 10762.\u003c\/p\u003e","published_at":"2018-07-06T15:32:36-07:00","created_at":"2018-10-16T13:38:08-07:00","vendor":"DIFtech","type":"Turbocharger Discharge Gasket","tags":["240SX","Nissan","S13","SR20DET"],"price":810,"price_min":810,"price_max":810,"available":false,"price_varies":false,"compare_at_price":900,"compare_at_price_min":900,"compare_at_price_max":900,"compare_at_price_varies":false,"variants":[{"id":13648212426815,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10758","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Gasket Turbo Discharge for Nissan 240SX S13 5-bolt Garrett T25 10758","public_title":null,"options":["Default Title"],"price":810,"weight":45,"compare_at_price":900,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395688111","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_7c2455de-870f-44e9-9c32-8449a24454bd.jpg?v=1571609582"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_7c2455de-870f-44e9-9c32-8449a24454bd.jpg?v=1571609582","options":["Title"],"media":[{"alt":"DIFtech Gasket Turbo Discharge for Nissan 240SX S13 5-bolt Garrett T25 10758 - Diftech","id":3404951650367,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1574,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_7c2455de-870f-44e9-9c32-8449a24454bd.jpg?v=1571609582"},"aspect_ratio":1.334,"height":1574,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_7c2455de-870f-44e9-9c32-8449a24454bd.jpg?v=1571609582","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFor Garrett T25 series turbo used on S13 chassis\u003c\/li\u003e\n\u003cli\u003eAll metal, multi-layer gasket material\u003c\/li\u003e\n\u003cli\u003e2.0mm (.080\") thick\u003c\/li\u003e\n\u003cli\u003ePrecise OEM-like tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis turbo discharge gasket is made from a superior multi-layer gasket material and precisely cut to OEM part profile. Made to ensure an excellent seal between the turbo and the down pipe on T25 turbos. OEM replacement for SR20DET engines used in the S13 chassis. The extra thickness will ensure a quality seal in high temperature and\/or high boost turbo applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eFor use with S13 factory turbos. For S14 or S15 use T28\/GT specific gasket 10762.\u003c\/p\u003e"}

$ 9.00 $ 8.10

DIFtech Steering Rack Extension for Nissan 240SX Offset Adapt S13 S14 S15 10784 - Diftech

Sale Sold Out

DIFtech Steering Rack Extension for Nissan 240SX Offset Adapt S13 S14 S15 10784 {"id":1407687983167,"title":"DIFtech Steering Rack Extension for Nissan 240SX Offset Adapt S13 S14 S15 10784","handle":"diftech-steering-rack-extension-adapter-offset-for-nissan-240sx-s13-s14-s15-10784","description":"\u003cp\u003eThese DIFtech, tie rod extensions for Nissan 240SX are designed to give S-chassis owners the option of higher steering angle and corrected steering geometry under extreme conditions.\u003cspan\u003e Made from hardened steel and designed specifically for the S-Chassis, these mount in between the inner tie rods and the steering rack and allow 8mm (.315\") more tie rod travel (per side) than stock.\u003c\/span\u003e\u003cspan\u003e These offset units also move the inner tie rod pickup point 1\" forward and up slightly, reducing steering bind at high angles and minimizing bump steer. Great for drifting or any extreme performance driving where steering feel is paramount. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eThis kit includes \u003c\/span\u003e\u003cspan\u003eone pair of DIFtech's hardened steel, offset rack extensions and grade 10.9 mounting hardware. \u003c\/span\u003e\u003cspan\u003eRunning shorter-than-stock inner tie rods is recommended when using these extensions (For example Z33 tie rods) to maintain proper adjustment range on the tie rod. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eFits Nissan 240SX S13 S14 and S15 steering racks.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-08-14T14:57:59-07:00","created_at":"2018-08-14T15:35:29-07:00","vendor":"DIFtech","type":"Steering Rack Extension","tags":["240SX","Nissan","S13","S14","S15"],"price":6750,"price_min":6750,"price_max":6750,"available":false,"price_varies":false,"compare_at_price":7500,"compare_at_price_min":7500,"compare_at_price_max":7500,"compare_at_price_varies":false,"variants":[{"id":12784482844735,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10784","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Steering Rack Extension for Nissan 240SX Offset Adapt S13 S14 S15 10784","public_title":null,"options":["Default Title"],"price":6750,"weight":794,"compare_at_price":7500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687466","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10784.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10784.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Steering Rack Extension for Nissan 240SX Offset Adapt S13 S14 S15 10784 - Diftech","id":3183816441919,"position":1,"preview_image":{"aspect_ratio":1.115,"height":269,"width":300,"src":"\/\/diftech.com\/cdn\/shop\/products\/10784.jpg?v=1571609580"},"aspect_ratio":1.115,"height":269,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10784.jpg?v=1571609580","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThese DIFtech, tie rod extensions for Nissan 240SX are designed to give S-chassis owners the option of higher steering angle and corrected steering geometry under extreme conditions.\u003cspan\u003e Made from hardened steel and designed specifically for the S-Chassis, these mount in between the inner tie rods and the steering rack and allow 8mm (.315\") more tie rod travel (per side) than stock.\u003c\/span\u003e\u003cspan\u003e These offset units also move the inner tie rod pickup point 1\" forward and up slightly, reducing steering bind at high angles and minimizing bump steer. Great for drifting or any extreme performance driving where steering feel is paramount. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eThis kit includes \u003c\/span\u003e\u003cspan\u003eone pair of DIFtech's hardened steel, offset rack extensions and grade 10.9 mounting hardware. \u003c\/span\u003e\u003cspan\u003eRunning shorter-than-stock inner tie rods is recommended when using these extensions (For example Z33 tie rods) to maintain proper adjustment range on the tie rod. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eFits Nissan 240SX S13 S14 and S15 steering racks.\u003c\/span\u003e\u003c\/p\u003e"}

$ 75.00 $ 67.50

DIFtech Rear Upper Camber Arms for Nissan 240SX S13 Adjustable Pair 10786 - Diftech

Sale Sold Out

DIFtech Rear Upper Camber Arms for Nissan 240SX S13 Adjustable Pair 10786 {"id":1407894290495,"title":"DIFtech Rear Upper Camber Arms for Nissan 240SX S13 Adjustable Pair 10786","handle":"diftech-adjustable-camber-upper-control-arm-fits-nissan-240sx-s13-rear-bearing-type-10786","description":"\u003cli\u003eFits Nissan 240sx S13 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 7.0 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable camber arms for the S13 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes about two hours.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-08-14T17:15:03-07:00","vendor":"DIFtech","type":"Camber Arm","tags":["240SX","Nissan","S13"],"price":11925,"price_min":11925,"price_max":11925,"available":false,"price_varies":false,"compare_at_price":13250,"compare_at_price_min":13250,"compare_at_price_max":13250,"compare_at_price_varies":false,"variants":[{"id":12785520967743,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10786","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Upper Camber Arms for Nissan 240SX S13 Adjustable Pair 10786","public_title":null,"options":["Default Title"],"price":11925,"weight":3175,"compare_at_price":13250,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687480","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10786.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10786.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Rear Upper Camber Arms for Nissan 240SX S13 Adjustable Pair 10786 - Diftech","id":3183946498111,"position":1,"preview_image":{"aspect_ratio":1.925,"height":187,"width":360,"src":"\/\/diftech.com\/cdn\/shop\/products\/10786.jpg?v=1571609580"},"aspect_ratio":1.925,"height":187,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10786.jpg?v=1571609580","width":360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Nissan 240sx S13 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 7.0 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable camber arms for the S13 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes about two hours.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e"}

$ 132.50 $ 119.25

DIFtech Transmission Mount for Nissan 240SX Solid Polyurethane S13 S14 S15 10811 - Diftech

Sale Sold Out

DIFtech Transmission Mount for Nissan 240SX Solid Polyurethane S13 S14 S15 10811 {"id":1588552466495,"title":"DIFtech Transmission Mount for Nissan 240SX Solid Polyurethane S13 S14 S15 10811","handle":"diftech-transmission-mount-kit-solid-poly-urethane-for-nissan-240sx-s13-s14-s15-10811","description":"\u003cp\u003eReplace your worn out OEM rubber transmission mount with DIFtech's polyurethane mount. Stock trans mounts, which have become old and soft, do not perform their original function anymore. Especially when power output is increased, OEM mounts allow too much engine and transmission movement. This results in power loss due to vibration, even breaking subframes or drivetrain components in extreme cases. These bushings will firm up your rear transmission mounting point while still allowing some vibration dampening unlike the 100% rigid aluminum mounts on the market. Some increased noise may result from running a firmer mount. This product best used in conjunction with DIFtech's poly engine mount kit ( 10810 ) to ensure equal rigidity across the whole front powertain assembly.\u003c\/p\u003e\n\u003cp\u003eFor use with all 240SX chassis. S13, S14, and S15 with KA24 or SR20 engines.\u003c\/p\u003e","published_at":"2016-03-16T13:21:00-07:00","created_at":"2018-11-21T16:16:16-08:00","vendor":"DIFtech","type":"Transmission Mount","tags":["240SX","KA24DE","Nissan","S13","S14","S15","SR20DET"],"price":4320,"price_min":4320,"price_max":4320,"available":false,"price_varies":false,"compare_at_price":4800,"compare_at_price_min":4800,"compare_at_price_max":4800,"compare_at_price_varies":false,"variants":[{"id":13822127931455,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10811","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Transmission Mount for Nissan 240SX Solid Polyurethane S13 S14 S15 10811","public_title":null,"options":["Default Title"],"price":4320,"weight":499,"compare_at_price":4800,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395688791","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_cc16e391-6b3c-45b1-8ef9-30e9d0e2f975.jpg?v=1579782554"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_cc16e391-6b3c-45b1-8ef9-30e9d0e2f975.jpg?v=1579782554","options":["Title"],"media":[{"alt":"DIFtech Transmission Mount for Nissan 240SX Solid Polyurethane S13 S14 S15 10811 - Diftech","id":3382127034431,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1561,"width":2082,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_cc16e391-6b3c-45b1-8ef9-30e9d0e2f975.jpg?v=1579782554"},"aspect_ratio":1.334,"height":1561,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_cc16e391-6b3c-45b1-8ef9-30e9d0e2f975.jpg?v=1579782554","width":2082}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplace your worn out OEM rubber transmission mount with DIFtech's polyurethane mount. Stock trans mounts, which have become old and soft, do not perform their original function anymore. Especially when power output is increased, OEM mounts allow too much engine and transmission movement. This results in power loss due to vibration, even breaking subframes or drivetrain components in extreme cases. These bushings will firm up your rear transmission mounting point while still allowing some vibration dampening unlike the 100% rigid aluminum mounts on the market. Some increased noise may result from running a firmer mount. This product best used in conjunction with DIFtech's poly engine mount kit ( 10810 ) to ensure equal rigidity across the whole front powertain assembly.\u003c\/p\u003e\n\u003cp\u003eFor use with all 240SX chassis. S13, S14, and S15 with KA24 or SR20 engines.\u003c\/p\u003e"}

$ 48.00 $ 43.20

DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810 - Diftech

Sale Sold Out

DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810 {"id":1588547551295,"title":"DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810","handle":"diftech-engine-mount-kit-solid-poly-urethane-for-nissan-240sx-s13-s14-s15-10810","description":"\u003cp\u003eReplace your worn out OEM rubber engine mounts with DIFtech polyurethane mounts. Stock engine mounts, which have become old and soft, do not perform their original function anymore. Especially when power output is increased, OEM mounts allow too much engine movement. This results in power loss due to vibration, even breaking subframes or drivetrain components in extreme cases. These bushings will firm up your engine mounting points while still allowing some vibration dampening unlike the 100% rigid aluminum mounts on the market. Some increased noise may result from running firmer mounts. This product best used in conjunction with DIFtech's poly transmission mount ( 10811 ) to ensure equal rigidity across the whole front powertain assembly.\u003c\/p\u003e\n\u003cp\u003eFor use with all 240SX chassis. S13, S14, and S15 with KA24 or SR20 engines.\u003c\/p\u003e","published_at":"2016-03-16T13:21:00-07:00","created_at":"2018-11-21T16:00:26-08:00","vendor":"DIFtech","type":"Engine Mount","tags":["240SX","KA24DE","Nissan","S13","S14","S15","SR20DET"],"price":8100,"price_min":8100,"price_max":8100,"available":false,"price_varies":false,"compare_at_price":9000,"compare_at_price_min":9000,"compare_at_price_max":9000,"compare_at_price_varies":false,"variants":[{"id":13822095523903,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10810","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810","public_title":null,"options":["Default Title"],"price":8100,"weight":907,"compare_at_price":9000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395688784","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_330f994e-655f-4762-bbe2-06d86490e64b.jpg?v=1571609585","\/\/diftech.com\/cdn\/shop\/products\/image_fc34bcfa-c6b5-408a-9f6f-9c5c4e29fd31.jpg?v=1571609585"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_330f994e-655f-4762-bbe2-06d86490e64b.jpg?v=1571609585","options":["Title"],"media":[{"alt":"DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810 - Diftech","id":3382118580287,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1634,"width":2179,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_330f994e-655f-4762-bbe2-06d86490e64b.jpg?v=1571609585"},"aspect_ratio":1.334,"height":1634,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_330f994e-655f-4762-bbe2-06d86490e64b.jpg?v=1571609585","width":2179},{"alt":"DIFtech Engine Mount Kit for Nissan 240SX Solid Polyurethane S13 S14 S15 10810 - Diftech","id":3382118481983,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1575,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_fc34bcfa-c6b5-408a-9f6f-9c5c4e29fd31.jpg?v=1571609585"},"aspect_ratio":1.333,"height":1575,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_fc34bcfa-c6b5-408a-9f6f-9c5c4e29fd31.jpg?v=1571609585","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eReplace your worn out OEM rubber engine mounts with DIFtech polyurethane mounts. Stock engine mounts, which have become old and soft, do not perform their original function anymore. Especially when power output is increased, OEM mounts allow too much engine movement. This results in power loss due to vibration, even breaking subframes or drivetrain components in extreme cases. These bushings will firm up your engine mounting points while still allowing some vibration dampening unlike the 100% rigid aluminum mounts on the market. Some increased noise may result from running firmer mounts. This product best used in conjunction with DIFtech's poly transmission mount ( 10811 ) to ensure equal rigidity across the whole front powertain assembly.\u003c\/p\u003e\n\u003cp\u003eFor use with all 240SX chassis. S13, S14, and S15 with KA24 or SR20 engines.\u003c\/p\u003e"}

$ 90.00 $ 81.00

DIFtech Rear Trailing Links for Nissan 240SX 300ZX Skyline Adjustable 10790 - Diftech

Sale Sold Out

DIFtech Rear Trailing Links for Nissan 240SX 300ZX Skyline Adjustable 10790 {"id":1410257682495,"title":"DIFtech Rear Trailing Links for Nissan 240SX 300ZX Skyline Adjustable 10790","handle":"diftech-adjustable-rear-traction-rod-for-nissan-240sx-300zx-skyline-bearing-type-10790","description":"\u003cli\u003eFits Nissan 240SX S13, S14, \u0026amp; S15 rear suspension\u003c\/li\u003e\n \u003cli\u003eAlso Fits Nissan 300ZX Z32 and Skyline R32, R33, \u0026amp; R34\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable traction rods for the Nissan S, Z and R chassis are designed to give enthusiasts a strong, adjustable, bearing-type replacement for the factory traction rods. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Running turnbuckle-type traction arms allows skilled enthusiasts to tune in the proper trade-offs in suspension geometry for their particular application. Adjustment range on these arms is more than you would ever need, and turnbuckle adjustment is easy to use. Those maintaining stock geometry still get the benefit of converting to spherical bearings. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes less than an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-08-15T14:04:44-07:00","vendor":"DIFtech","type":"Traction Rod","tags":["180SX","240SX","300ZX","Nissan","R32","R33","R34","S13","S14","S15","Skyline","Z32"],"price":9900,"price_min":9900,"price_max":9900,"available":false,"price_varies":false,"compare_at_price":11000,"compare_at_price_min":11000,"compare_at_price_max":11000,"compare_at_price_varies":false,"variants":[{"id":12806477840447,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10790","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Trailing Links for Nissan 240SX 300ZX Skyline Adjustable 10790","public_title":null,"options":["Default Title"],"price":9900,"weight":2041,"compare_at_price":11000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687527","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10790.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10790.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Rear Trailing Links for Nissan 240SX 300ZX Skyline Adjustable 10790 - Diftech","id":3183970418751,"position":1,"preview_image":{"aspect_ratio":1.454,"height":141,"width":205,"src":"\/\/diftech.com\/cdn\/shop\/products\/10790.jpg?v=1571609580"},"aspect_ratio":1.454,"height":141,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10790.jpg?v=1571609580","width":205}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Nissan 240SX S13, S14, \u0026amp; S15 rear suspension\u003c\/li\u003e\n \u003cli\u003eAlso Fits Nissan 300ZX Z32 and Skyline R32, R33, \u0026amp; R34\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable traction rods for the Nissan S, Z and R chassis are designed to give enthusiasts a strong, adjustable, bearing-type replacement for the factory traction rods. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Running turnbuckle-type traction arms allows skilled enthusiasts to tune in the proper trade-offs in suspension geometry for their particular application. Adjustment range on these arms is more than you would ever need, and turnbuckle adjustment is easy to use. Those maintaining stock geometry still get the benefit of converting to spherical bearings. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes less than an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e"}

$ 110.00 $ 99.00

DIFtech Rear Adjustable Camber Arms for Nissan 350Z Z33 LCA Bearing type 10798 - Diftech

Sale Sold Out

DIFtech Rear Adjustable Camber Arms for Nissan 350Z Z33 LCA Bearing type 10798 {"id":1416108507199,"title":"DIFtech Rear Adjustable Camber Arms for Nissan 350Z Z33 LCA Bearing type 10798","handle":"diftech-adjustable-camber-lower-control-arms-for-nissan-350z-z33-rear-bearing-type-10798","description":"\u003cli\u003eFits Nissan 350Z Z33 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable camber arms for the Z33 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes less than an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-08-17T10:13:36-07:00","vendor":"DIFtech","type":"Camber Arm","tags":["350Z","Nismo","Nissan","Z33"],"price":12600,"price_min":12600,"price_max":12600,"available":false,"price_varies":false,"compare_at_price":14000,"compare_at_price_min":14000,"compare_at_price_max":14000,"compare_at_price_varies":false,"variants":[{"id":12843004493887,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10798","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Adjustable Camber Arms for Nissan 350Z Z33 LCA Bearing type 10798","public_title":null,"options":["Default Title"],"price":12600,"weight":2359,"compare_at_price":14000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687602","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_ae5486cb-9915-4494-bd31-b6835cd19667.jpg?v=1571609581"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_ae5486cb-9915-4494-bd31-b6835cd19667.jpg?v=1571609581","options":["Title"],"media":[{"alt":"DIFtech Rear Adjustable Camber Arms for Nissan 350Z Z33 LCA Bearing type 10798 - Diftech","id":3186125307967,"position":1,"preview_image":{"aspect_ratio":1.335,"height":2049,"width":2735,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_ae5486cb-9915-4494-bd31-b6835cd19667.jpg?v=1571609581"},"aspect_ratio":1.335,"height":2049,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_ae5486cb-9915-4494-bd31-b6835cd19667.jpg?v=1571609581","width":2735}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Nissan 350Z Z33 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable camber arms for the Z33 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads with an included dust boot to ensure a long, problem-free service life.\u003cspan\u003e Easy, bolt-up installation takes less than an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e"}

$ 140.00 $ 126.00

DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641 - Diftech

Sale Sold Out

DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641 {"id":581350621211,"title":"DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641","handle":"dual-articulating-rear-spring-perch-kit-fits-nissan-350z-370z","description":"\u003cul\u003e\n\u003cli\u003eFits Nissan Z33 and Z34 chassis\u003c\/li\u003e\n\u003cli\u003eDual articulated spring perches ensure consistent spring rate\u003c\/li\u003e\n\u003cli\u003eSimple under-body ride height adjustment\u003c\/li\u003e\n\u003cli\u003eEasy-to-use detent style adjuster\u003c\/li\u003e\n\u003cli\u003eRequires drilling of stock control arm\u003c\/li\u003e\n\u003cli\u003eDesigned to work with 65mm diameter x 6\" (152mm) long springs\u003c\/li\u003e\n\u003cli\u003eComplete kit includes mounting hardware and install tool\u003c\/li\u003e\n\u003cli\u003eSprings\u003cem\u003e not\u003c\/em\u003e included\u003c\/li\u003e\n\u003cli\u003eMade from high strength, aerospace alloys\u003c\/li\u003e\n\u003cli\u003eAnodized finish for look and durability\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinally on the market, an articulating rear spring perch for 350Z and 370Z! This kit is the absolute best way to convert your stock rear spring setup into an adjustable performance setup. The ride height adjuster is moved to the under side of the rear control arm for easy adjustment without removing the wheels. The adjuster is made with spring detents to give adjustment reference points and to hold the adjustment in place while the spring is unloaded. Most importantly, the spherical mounted articulating spring perches eliminate the angular influence that the rear control arm has on the spring as the arm swings, allowing your linear race springs to stay linear.\u003c\/p\u003e\n\u003cp\u003eThe spring-on-arm location on the stock Z33 and Z34 chassis is great for minimizing shock bind and freeing up room in the rear wheel wells, but it comes with its own problems. As the suspension is compressed and the arm swings upward, the locating angles of the upper and lower spring faces change. This results in the spring loading unevenly and, therefore in a non-linear fashion; meaning that your carefully chosen spring rates aren't doing what they're calculated to do. This dual articulating perch system eliminates that problem entirely and allows linear race springs to work in their free state, resulting in a more planted and predictable back-end of your competition Z car. In addition, the ease of the single hex under-body adjustment is a welcome change over other ride height systems on the market often require wheel removal and clumsy spanners. If you are looking for quality rear ride height adjusters for your Z build, look no further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eDrilling of the rear control arm is required for installation. Hole saw and installation instructions are included. Currently legal for SCCA Solo STU class competition. Check your rulebook for your specific class compliance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDIFtech only recommends using this kit with 6\" or 152mm long springs for proper ride height range. This kit includes 65mm spring retainers. Custom diameter sizing available upon request.\u003c\/p\u003e","published_at":"2018-01-30T12:43:31-08:00","created_at":"2018-01-30T12:45:23-08:00","vendor":"DIFtech","type":"Articulating Spring Perch","tags":["350Z","370Z","Nismo","Nissan","Z33","Z34"],"price":50000,"price_min":50000,"price_max":50000,"available":false,"price_varies":false,"compare_at_price":60000,"compare_at_price_min":60000,"compare_at_price_max":60000,"compare_at_price_varies":false,"variants":[{"id":6062503723035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10641","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641","public_title":null,"options":["Default Title"],"price":50000,"weight":2948,"compare_at_price":60000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686506","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_0bee12f0-655b-495a-bb88-1f1ff932eb05.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_52aff9fc-8bab-46c0-ad28-240d0b9366b0.jpg?v=1571609577"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_0bee12f0-655b-495a-bb88-1f1ff932eb05.jpg?v=1571609577","options":["Title"],"media":[{"alt":"DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641 - Diftech","id":2790186483775,"position":1,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_0bee12f0-655b-495a-bb88-1f1ff932eb05.jpg?v=1571609577"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_0bee12f0-655b-495a-bb88-1f1ff932eb05.jpg?v=1571609577","width":3264},{"alt":"DIFtech Rear Articulating Perch kit for Nissan 350z 370z Under-body Adjust 10641 - Diftech","id":2790186451007,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1910,"width":2548,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_52aff9fc-8bab-46c0-ad28-240d0b9366b0.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1910,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_52aff9fc-8bab-46c0-ad28-240d0b9366b0.jpg?v=1571609577","width":2548}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits Nissan Z33 and Z34 chassis\u003c\/li\u003e\n\u003cli\u003eDual articulated spring perches ensure consistent spring rate\u003c\/li\u003e\n\u003cli\u003eSimple under-body ride height adjustment\u003c\/li\u003e\n\u003cli\u003eEasy-to-use detent style adjuster\u003c\/li\u003e\n\u003cli\u003eRequires drilling of stock control arm\u003c\/li\u003e\n\u003cli\u003eDesigned to work with 65mm diameter x 6\" (152mm) long springs\u003c\/li\u003e\n\u003cli\u003eComplete kit includes mounting hardware and install tool\u003c\/li\u003e\n\u003cli\u003eSprings\u003cem\u003e not\u003c\/em\u003e included\u003c\/li\u003e\n\u003cli\u003eMade from high strength, aerospace alloys\u003c\/li\u003e\n\u003cli\u003eAnodized finish for look and durability\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinally on the market, an articulating rear spring perch for 350Z and 370Z! This kit is the absolute best way to convert your stock rear spring setup into an adjustable performance setup. The ride height adjuster is moved to the under side of the rear control arm for easy adjustment without removing the wheels. The adjuster is made with spring detents to give adjustment reference points and to hold the adjustment in place while the spring is unloaded. Most importantly, the spherical mounted articulating spring perches eliminate the angular influence that the rear control arm has on the spring as the arm swings, allowing your linear race springs to stay linear.\u003c\/p\u003e\n\u003cp\u003eThe spring-on-arm location on the stock Z33 and Z34 chassis is great for minimizing shock bind and freeing up room in the rear wheel wells, but it comes with its own problems. As the suspension is compressed and the arm swings upward, the locating angles of the upper and lower spring faces change. This results in the spring loading unevenly and, therefore in a non-linear fashion; meaning that your carefully chosen spring rates aren't doing what they're calculated to do. This dual articulating perch system eliminates that problem entirely and allows linear race springs to work in their free state, resulting in a more planted and predictable back-end of your competition Z car. In addition, the ease of the single hex under-body adjustment is a welcome change over other ride height systems on the market often require wheel removal and clumsy spanners. If you are looking for quality rear ride height adjusters for your Z build, look no further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eDrilling of the rear control arm is required for installation. Hole saw and installation instructions are included. Currently legal for SCCA Solo STU class competition. Check your rulebook for your specific class compliance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDIFtech only recommends using this kit with 6\" or 152mm long springs for proper ride height range. This kit includes 65mm spring retainers. Custom diameter sizing available upon request.\u003c\/p\u003e"}

$ 600.00 $ 500.00

DIFtech Water Pump Block-Off Plate for Nissan 240SX S14 SR20DET Delete kit 10542 - Diftech

Sale Sold Out

DIFtech Water Pump Block-Off Plate for Nissan 240SX S14 SR20DET Delete kit 10542 {"id":5403955270,"title":"DIFtech Water Pump Block-Off Plate for Nissan 240SX S14 SR20DET Delete kit 10542","handle":"water-pump-delete-block-off-plate-s14-sr20det-59117","description":"\u003cp\u003e\u003cstrong\u003eDIF Water Pump Deletion Plate - Nissan S14 SR20DET\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThisDIF Water Pump Deletion Plate allows for the integration of an electric water pump into the S14 SR20DET engine.\u003c\/p\u003e\n\u003cp\u003eFor extremely high revving engines a more consistent water pump is often recommended. When engines rev' extremely fast their water pumps also rev at a correlating speeds. The excessively high rotation of the water pump can sometimes lead to cavitation, or the formation and then immediate implosion of cavities in a liquid - i.e. small liquid-free zones (\"bubbles\") - that are the consequence of forces acting upon the liquid. These bubbles, after prolonged exposure, can harm the engine block or pump propellers. It is because of this electric water pumps are used. They allow for a stable flow of coolant and ignore completely the rpm's a vehicle is going through. Additionally, an electric water pump reduces parasitic drag on the engine since it would be free of another pulley, ultimately gaining more horsepower.\u003c\/p\u003e\n\u003cp\u003eTheDIF Water Pump Deletion Plate is a perfect compliment to an electric water pump because it will become necessary to block the hole where the pulley-based water pump used to be. This deletion plate is made with extreme precision and fits S14 SR20DET engines perfectly. It is also anodized in Silver for a cleaner, more aesthetic look. All hardware is supplied for an easy install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Electric water pump sold seperately.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2018-03-13T19:53:24-07:00","created_at":"2016-03-16T13:22:35-07:00","vendor":"DIFtech","type":"Water Pump Block-Off Plate","tags":["240SX","Nissan","S14","SR20DET"],"price":8000,"price_min":8000,"price_max":8000,"available":false,"price_varies":false,"compare_at_price":10000,"compare_at_price_min":10000,"compare_at_price_max":10000,"compare_at_price_varies":false,"variants":[{"id":16883625926,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10542","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Water Pump Block-Off Plate for Nissan 240SX S14 SR20DET Delete kit 10542","public_title":null,"options":["Default Title"],"price":8000,"weight":907,"compare_at_price":10000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395684960","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/59117_DIF_10542_FS01-01_2x1446868531563d7633ddb9a.jpeg?v=1579782569"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/59117_DIF_10542_FS01-01_2x1446868531563d7633ddb9a.jpeg?v=1579782569","options":["Title"],"media":[{"alt":"DIFtech Water Pump Block-Off Plate for Nissan 240SX S14 SR20DET Delete kit 10542 - Diftech","id":2200325226559,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/diftech.com\/cdn\/shop\/products\/59117_DIF_10542_FS01-01_2x1446868531563d7633ddb9a.jpeg?v=1579782569"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/59117_DIF_10542_FS01-01_2x1446868531563d7633ddb9a.jpeg?v=1579782569","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDIF Water Pump Deletion Plate - Nissan S14 SR20DET\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThisDIF Water Pump Deletion Plate allows for the integration of an electric water pump into the S14 SR20DET engine.\u003c\/p\u003e\n\u003cp\u003eFor extremely high revving engines a more consistent water pump is often recommended. When engines rev' extremely fast their water pumps also rev at a correlating speeds. The excessively high rotation of the water pump can sometimes lead to cavitation, or the formation and then immediate implosion of cavities in a liquid - i.e. small liquid-free zones (\"bubbles\") - that are the consequence of forces acting upon the liquid. These bubbles, after prolonged exposure, can harm the engine block or pump propellers. It is because of this electric water pumps are used. They allow for a stable flow of coolant and ignore completely the rpm's a vehicle is going through. Additionally, an electric water pump reduces parasitic drag on the engine since it would be free of another pulley, ultimately gaining more horsepower.\u003c\/p\u003e\n\u003cp\u003eTheDIF Water Pump Deletion Plate is a perfect compliment to an electric water pump because it will become necessary to block the hole where the pulley-based water pump used to be. This deletion plate is made with extreme precision and fits S14 SR20DET engines perfectly. It is also anodized in Silver for a cleaner, more aesthetic look. All hardware is supplied for an easy install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Electric water pump sold seperately.\u003c\/strong\u003e\u003c\/p\u003e"}

$ 100.00 $ 80.00

DIFtech Rear Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10791 - Diftech

Sale Sold Out

DIFtech Rear Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10791 {"id":1410323939391,"title":"DIFtech Rear Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10791","handle":"diftech-adjustable-camber-lower-control-arms-for-nissan-240sx-s13-s14-rear-bearing-type-10791","description":"\u003cli\u003eFits Nissan 240sx S13 \u0026amp; S14 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 7.0 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable lower control arms for the S13 and S14 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The outboard turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses all spherical bearings to eliminate deflection under heavy cornering loads.\u003cspan\u003e Easy, bolt-up installation takes about two hours.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-08-15T15:10:17-07:00","vendor":"DIFtech","type":"Camber Arm","tags":["240SX","Nissan","S13","S14"],"price":36000,"price_min":36000,"price_max":36000,"available":false,"price_varies":false,"compare_at_price":40000,"compare_at_price_min":40000,"compare_at_price_max":40000,"compare_at_price_varies":false,"variants":[{"id":12807012974655,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10791","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10791","public_title":null,"options":["Default Title"],"price":36000,"weight":8029,"compare_at_price":40000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687534","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10791.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10791.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Rear Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10791 - Diftech","id":3183972548671,"position":1,"preview_image":{"aspect_ratio":1.685,"height":178,"width":300,"src":"\/\/diftech.com\/cdn\/shop\/products\/10791.jpg?v=1571609580"},"aspect_ratio":1.685,"height":178,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10791.jpg?v=1571609580","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Nissan 240sx S13 \u0026amp; S14 rear suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 7.0 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel design \u003c\/li\u003e\n \u003cli\u003eHeavy duty spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type rear adjustable lower control arms for the S13 and S14 chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength package works for daily driven cars, as well as track day, autocross, or drift cars. Camber adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The outboard turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Your alignment guy will thank you. \u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel and powder coated. This arm uses all spherical bearings to eliminate deflection under heavy cornering loads.\u003cspan\u003e Easy, bolt-up installation takes about two hours.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e"}

$ 400.00 $ 360.00

DIFtech Front Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10792 - Diftech

Sale Sold Out

DIFtech Front Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10792 {"id":1410334654527,"title":"DIFtech Front Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10792","handle":"diftech-adjustable-camber-lower-control-arms-for-nissan-240sx-s13-s14-front-bearing-type-10792","description":"\u003cli\u003eFits Nissan 240sx S13 \u0026amp; S14 front suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 4.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel designÂ \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type front adjustable lower control arms for the S13 and S14 chassis are designed to give enthusiasts more options for alignment in their performance 240SX. This high strength package works for daily driven cars, as well as track day, autocross, or drift cars. Adding a camber adjustment point on the lower end allows owners to fine tune not only camber, but also track for better stance and inboard wheel clearance. The inboard turnbuckle adjuster allows tuners to easily make the adjustments needed for their particular setup.\u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel, gusseted for strength, and powder coated for durability. This arm uses all spherical bearings to eliminate deflection under heavy cornering loads.\u003cspan\u003e Easy, bolt-up installation.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-08-15T15:29:49-07:00","vendor":"DIFtech","type":"Camber Arm","tags":["240SX","Nissan","S13","S14"],"price":30150,"price_min":30150,"price_max":30150,"available":false,"price_varies":false,"compare_at_price":33500,"compare_at_price_min":33500,"compare_at_price_max":33500,"compare_at_price_varies":false,"variants":[{"id":12807087980607,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10792","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10792","public_title":null,"options":["Default Title"],"price":30150,"weight":6350,"compare_at_price":33500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687541","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/10792.jpg?v=1571609580"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/10792.jpg?v=1571609580","options":["Title"],"media":[{"alt":"DIFtech Front Lower Camber Arms for Nissan 240SX S13 S14 Adjustable Pair 10792 - Diftech","id":3183974187071,"position":1,"preview_image":{"aspect_ratio":1.515,"height":198,"width":300,"src":"\/\/diftech.com\/cdn\/shop\/products\/10792.jpg?v=1571609580"},"aspect_ratio":1.515,"height":198,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10792.jpg?v=1571609580","width":300}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Nissan 240sx S13 \u0026amp; S14 front suspension\u003c\/li\u003e\n \u003cli\u003eSold in pairs\u003c\/li\u003e\n \u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n \u003cli\u003eOver 4.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n \u003cli\u003eStrong tubular alloy steel designÂ \u003c\/li\u003e\n \u003cli\u003eHeavy duty dust-sealed spherical rod ends\u003c\/li\u003e\n \u003cli\u003ePowder-coated finish for aesthetics and durability\u003c\/li\u003e\n \u003cli\u003eBolt-in installation\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese bearing-type front adjustable lower control arms for the S13 and S14 chassis are designed to give enthusiasts more options for alignment in their performance 240SX. This high strength package works for daily driven cars, as well as track day, autocross, or drift cars. Adding a camber adjustment point on the lower end allows owners to fine tune not only camber, but also track for better stance and inboard wheel clearance. The inboard turnbuckle adjuster allows tuners to easily make the adjustments needed for their particular setup.\u003c\/p\u003e\n \u003cp\u003eFabricated from tubular alloy steel, gusseted for strength, and powder coated for durability. This arm uses all spherical bearings to eliminate deflection under heavy cornering loads.\u003cspan\u003e Easy, bolt-up installation.\u003c\/span\u003e\u003c\/p\u003e"}

$ 335.00 $ 301.50

Clearance

Categories

Make Clear

Model Clear

Engine or Chassis code Clear