DIFtech Front Shock Hats for Alfa Romeo Giulia Pair Coilover Susp Moun

DIFtech Front Shock Hats for Alfa Romeo Giulia Pair Coilover Susp Mounts 10691

DIFtech

Fits Alfa Romeo Giulia chassis - Front
Coaxial design for increased traction and reduced shock blind
Hat movement is independent of spring compression axis
Spherical bearing to eliminate bushing deflection under load
6061-T6 aerospace...

$ 300.00

Fits Alfa Romeo Giulia chassis - Front
Coaxial design for increased traction and reduced shock blind
Hat movement is independent of spring compression axis
Spherical bearing to eliminate bushing deflection under load
6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight
FK large 3/4" high-quality spherical bearings
Install kit required (available for each shock brand)
Custom install kits available (email us for your custom application)
Anodized black finish for durability
Engineered, tested, and manufactured in the United States

These extended front top hats for the Alfa Romeo Giulia are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This top hat design allows the shock shaft to be tucked higher into the body of the car allowing the shock body to also tuck higher than normal. This results in more shock travel before bottoming out and will increase suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.

Non-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forces the spring to have nonlinear compression rate. Increased friction leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.

Not designed for use with stock or stock-type springs. DIFtech install kit required to adapt to a linear race spring.

Made in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. On-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Other products that may fit your vehicle.

DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01 - Diftech

Sold Out

DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01 {"id":9251597580,"title":"DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01","handle":"front-hat-install-kit-alfa-romeo-giulia-kw-v3-10691-01","description":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia Type 952 chassis\u003c\/li\u003e\n \u003cli\u003eFits KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK large 3\/4\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eInstall kit includes everything needed for bolt-on install\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats are designed to convert to a true coaxial setup and will allow maximum compression stroke of the shock. The top hat design allows the shock shaft to be tucked higher into the body of the car\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eallowing the shock body to also tuck an additional 3\/8\" or 10mm more than normal\u003c\/span\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThis results in more shock travel before bottoming out and will increase suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forces the spring to have nonlinear compression rate. Increased friction leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eThis kit includes spring retainers and isolators specifically for KW barrel type springs. This is a one stop, bolt-on kit.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Customers can email us for custom install kits for specific racing applications.\u003c\/p\u003e","published_at":"2019-05-06T11:18:28-07:00","created_at":"2016-12-21T20:06:03-08:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Alfa Romeo","Giulia","Giulia Quadrifoglio","Type 952"],"price":55000,"price_min":55000,"price_max":55000,"available":false,"price_varies":false,"compare_at_price":55000,"compare_at_price_min":55000,"compare_at_price_max":55000,"compare_at_price_varies":false,"variants":[{"id":32045257996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10691-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01","public_title":null,"options":["Default Title"],"price":55000,"weight":2268,"compare_at_price":55000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686742","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_d60cb72e-c80a-4c11-9fc2-e60013fd18d8.jpg?v=1571609575","\/\/diftech.com\/cdn\/shop\/products\/image_f14d2cf5-4fc5-41dc-814c-a7a72d2c147d.jpg?v=1571609575"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_d60cb72e-c80a-4c11-9fc2-e60013fd18d8.jpg?v=1571609575","options":["Title"],"media":[{"alt":"DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01 - Diftech","id":3003554496575,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1854,"width":2474,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_d60cb72e-c80a-4c11-9fc2-e60013fd18d8.jpg?v=1571609575"},"aspect_ratio":1.334,"height":1854,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_d60cb72e-c80a-4c11-9fc2-e60013fd18d8.jpg?v=1571609575","width":2474},{"alt":"DIFtech Front Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10691-01 - Diftech","id":3016166670399,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_f14d2cf5-4fc5-41dc-814c-a7a72d2c147d.jpg?v=1571609575"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_f14d2cf5-4fc5-41dc-814c-a7a72d2c147d.jpg?v=1571609575","width":3264}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia Type 952 chassis\u003c\/li\u003e\n \u003cli\u003eFits KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK large 3\/4\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eInstall kit includes everything needed for bolt-on install\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats are designed to convert to a true coaxial setup and will allow maximum compression stroke of the shock. The top hat design allows the shock shaft to be tucked higher into the body of the car\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eallowing the shock body to also tuck an additional 3\/8\" or 10mm more than normal\u003c\/span\u003e.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eThis results in more shock travel before bottoming out and will increase suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forces the spring to have nonlinear compression rate. Increased friction leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eThis kit includes spring retainers and isolators specifically for KW barrel type springs. This is a one stop, bolt-on kit.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Customers can email us for custom install kits for specific racing applications.\u003c\/p\u003e"}

$ 550.00

DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 - Diftech

Sold Out

DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 {"id":5403943238,"title":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01","handle":"upper-shock-mount-hat-alfa-romeo-giulia-rear-kw-v3-10727","description":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia\u003c\/li\u003e\n \u003cli\u003eFor KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required for fitment to different dampers\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e3\/4\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the new Alfa Romeo Giulia chassis and KW V3 coilovers are designed to convert to an upper bearing type mount for increased damper response. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your modified Giulia. \u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eGiulia \u003c\/span\u003emounts are a rubber bushing setup, which allows a lot of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e This kit is for KW coilovers only. However customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-05-06T11:18:31-07:00","created_at":"2016-03-16T13:21:51-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Alfa Romeo","Giulia","Giulia Quadrifoglio","Type 952"],"price":22000,"price_min":22000,"price_max":22000,"available":false,"price_varies":false,"compare_at_price":22000,"compare_at_price_min":22000,"compare_at_price_max":22000,"compare_at_price_varies":false,"variants":[{"id":16883608646,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10692-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01","public_title":null,"options":["Default Title"],"price":22000,"weight":907,"compare_at_price":22000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686810","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_8f552b99-1514-45fb-8245-af0545723c6c.jpg?v=1571609569","\/\/diftech.com\/cdn\/shop\/products\/image_535e0091-9e2d-46f2-8e8f-7ace6cadaa6d.jpg?v=1571609569","\/\/diftech.com\/cdn\/shop\/products\/image_1ed4dd42-5604-4b39-aa42-c92eec06dd8a.jpg?v=1571609569","\/\/diftech.com\/cdn\/shop\/products\/image_99040d2f-6cf2-480d-9761-d8ad89f81f51.jpg?v=1571609569"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_8f552b99-1514-45fb-8245-af0545723c6c.jpg?v=1571609569","options":["Title"],"media":[{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 - Diftech","id":3010333409343,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1747,"width":2330,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_8f552b99-1514-45fb-8245-af0545723c6c.jpg?v=1571609569"},"aspect_ratio":1.334,"height":1747,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_8f552b99-1514-45fb-8245-af0545723c6c.jpg?v=1571609569","width":2330},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 - Diftech","id":3010333769791,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_535e0091-9e2d-46f2-8e8f-7ace6cadaa6d.jpg?v=1571609569"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_535e0091-9e2d-46f2-8e8f-7ace6cadaa6d.jpg?v=1571609569","width":3264},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 - Diftech","id":3010333507647,"position":3,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_1ed4dd42-5604-4b39-aa42-c92eec06dd8a.jpg?v=1571609569"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_1ed4dd42-5604-4b39-aa42-c92eec06dd8a.jpg?v=1571609569","width":3264},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia pair KW Variant 3 Mounts 10692-01 - Diftech","id":3010333704255,"position":4,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_99040d2f-6cf2-480d-9761-d8ad89f81f51.jpg?v=1571609569"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_99040d2f-6cf2-480d-9761-d8ad89f81f51.jpg?v=1571609569","width":3264}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia\u003c\/li\u003e\n \u003cli\u003eFor KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required for fitment to different dampers\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e3\/4\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the new Alfa Romeo Giulia chassis and KW V3 coilovers are designed to convert to an upper bearing type mount for increased damper response. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your modified Giulia. \u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eGiulia \u003c\/span\u003emounts are a rubber bushing setup, which allows a lot of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e This kit is for KW coilovers only. However customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e"}

$ 220.00

DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 - Diftech

Sold Out

DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 {"id":447612321819,"title":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692","handle":"shock-upper-mount-suspension-top-hat-fits-alfa-romeo-giulia-rear","description":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required for fitment to different dampers\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e3\/4\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the new Alfa Romeo Giulia chassis are designed to convert to an upper bearing type mount for increased damper response. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your modified Giulia. \u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eGiulia \u003c\/span\u003emounts are a rubber bushing setup, which allows a lot of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. \u003cspan\u003e On-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-12-15T17:37:38-08:00","created_at":"2017-12-15T17:39:21-08:00","vendor":"DIFtech","type":"Top Hat","tags":["Alfa Romeo","Giulia","Giulia Quadrifoglio","Type 952"],"price":19000,"price_min":19000,"price_max":19000,"available":false,"price_varies":false,"compare_at_price":19000,"compare_at_price_min":19000,"compare_at_price_max":19000,"compare_at_price_varies":false,"variants":[{"id":14530998534207,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10692","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692","public_title":null,"options":["Default Title"],"price":19000,"weight":680,"compare_at_price":19000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686452","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_13a5f07a-508c-416f-b31b-0758d2d759dc.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/10691-01-3.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/10692-01-1.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/10692-01-2.jpg?v=1571609577"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_13a5f07a-508c-416f-b31b-0758d2d759dc.jpg?v=1571609577","options":["Title"],"media":[{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 - Diftech","id":2774406725695,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1482,"width":1977,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_13a5f07a-508c-416f-b31b-0758d2d759dc.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1482,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_13a5f07a-508c-416f-b31b-0758d2d759dc.jpg?v=1571609577","width":1977},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 - Diftech","id":3190884663359,"position":2,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/diftech.com\/cdn\/shop\/products\/10691-01-3.jpg?v=1571609577"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10691-01-3.jpg?v=1571609577","width":600},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 - Diftech","id":3190884696127,"position":3,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/diftech.com\/cdn\/shop\/products\/10692-01-1.jpg?v=1571609577"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10692-01-1.jpg?v=1571609577","width":600},{"alt":"DIFtech Rear Shock Hats for Alfa Romeo Giulia Pair Upper Damper Mounts 10692 - Diftech","id":3190884728895,"position":4,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/diftech.com\/cdn\/shop\/products\/10692-01-2.jpg?v=1571609577"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10692-01-2.jpg?v=1571609577","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits Alfa Romeo Giulia\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required for fitment to different dampers\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e3\/4\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the new Alfa Romeo Giulia chassis are designed to convert to an upper bearing type mount for increased damper response. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your modified Giulia. \u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eGiulia \u003c\/span\u003emounts are a rubber bushing setup, which allows a lot of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. \u003cspan\u003e On-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e"}

$ 190.00

DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w/ KW Variant 3 10691-51 - Diftech

Sold Out

DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w/ KW Variant 3 10691-51 {"id":9251597452,"title":"DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w\/ KW Variant 3 10691-51","handle":"install-kit-alfa-romeo-giulia-kw-v3-10719","description":"\u003cp\u003e\u003cspan\u003eThis install kit is for mounting DIFtech Alfa Romeo Giulia front upper shock mounts on KW V3 and V1 coilover shocks. Includes spring retainer for stock-type spring and stock spring isolator.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This listing for install kit \u003cem\u003eonly\u003c\/em\u003e. For kit including top hat plate, search 10720\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-21T20:06:02-08:00","created_at":"2016-12-21T20:06:02-08:00","vendor":"DIFtech","type":"Hat Install Kit","tags":["Alfa Romeo","Giulia","Giulia Quadrifoglio","Type 952"],"price":25000,"price_min":25000,"price_max":25000,"available":false,"price_varies":false,"compare_at_price":25000,"compare_at_price_min":25000,"compare_at_price_max":25000,"compare_at_price_varies":false,"variants":[{"id":32045257868,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10691-51","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w\/ KW Variant 3 10691-51","public_title":null,"options":["Default Title"],"price":25000,"weight":1134,"compare_at_price":25000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686735","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_79db5e08-ef01-40a5-a148-f9241704daf7.jpg?v=1579782530","\/\/diftech.com\/cdn\/shop\/products\/image_92a0fc52-5fba-4b5b-9093-ae6e47496200.jpg?v=1579782530"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_79db5e08-ef01-40a5-a148-f9241704daf7.jpg?v=1579782530","options":["Title"],"media":[{"alt":"DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w\/ KW Variant 3 10691-51 - Diftech","id":3003552661567,"position":1,"preview_image":{"aspect_ratio":1.334,"height":2031,"width":2709,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_79db5e08-ef01-40a5-a148-f9241704daf7.jpg?v=1579782530"},"aspect_ratio":1.334,"height":2031,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_79db5e08-ef01-40a5-a148-f9241704daf7.jpg?v=1579782530","width":2709},{"alt":"DIFtech Top Hat Install Kit FRONT for Alfa Romeo Giulia w\/ KW Variant 3 10691-51 - Diftech","id":3016165883967,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2448,"width":3264,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_92a0fc52-5fba-4b5b-9093-ae6e47496200.jpg?v=1579782530"},"aspect_ratio":1.333,"height":2448,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_92a0fc52-5fba-4b5b-9093-ae6e47496200.jpg?v=1579782530","width":3264}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThis install kit is for mounting DIFtech Alfa Romeo Giulia front upper shock mounts on KW V3 and V1 coilover shocks. Includes spring retainer for stock-type spring and stock spring isolator.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This listing for install kit \u003cem\u003eonly\u003c\/em\u003e. For kit including top hat plate, search 10720\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e"}

$ 250.00

Sold Out

DIFtech Top Hat Install Kit REAR for Alfa Romeo Giulia w/ KW Variant 3 10692-51

$ 30.00

DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694 - Diftech

Sold Out

[DISCONTINUED] DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694 {"id":513660485659,"title":"[DISCONTINUED] DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694","handle":"adjustable-camber-upper-control-arm-fits-alfa-romeo-giulia-rear-bearing","description":"\u003cli\u003eFits Alfa Romeo Giulia rear suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOver 5.0 degrees of camber adjustment\u003c\/li\u003e\n\u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n\u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n\u003cli\u003ePreload washers used to ensure consistent adjustment\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n\u003cli\u003eHeavy duty 7\/8\" FK wide series spherical bearings\u003c\/li\u003e\n\u003cli\u003eAnodized grey finish for aesthetics and durability\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese bearing-type rear adjustable camber arms for the Alfa Romeo Giulia chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Preload washers are also used so that camber can be set without worrying about it shifting or moving when you lock down the jam nuts. Your alignment guy will thank you.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads. DIFtech uses high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e Easy, bolt-up installation takes about an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-01-08T15:05:01-08:00","created_at":"2018-01-08T15:05:07-08:00","vendor":"DIFtech","type":"Camber Arm","tags":["Alfa Romeo","discontinued","Giulia","Giulia Quadrifoglio","Type 952"],"price":50000,"price_min":50000,"price_max":50000,"available":false,"price_varies":false,"compare_at_price":50000,"compare_at_price_min":50000,"compare_at_price_max":50000,"compare_at_price_varies":false,"variants":[{"id":5691786461211,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10694","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"[DISCONTINUED] DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694","public_title":null,"options":["Default Title"],"price":50000,"weight":2109,"compare_at_price":50000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686476","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_4d41764f-f0d1-465a-8c05-5db397bee8ae.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_d3dc091c-a940-43d5-84b1-d9c47c1e8076.jpg?v=1571609577"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_4d41764f-f0d1-465a-8c05-5db397bee8ae.jpg?v=1571609577","options":["Title"],"media":[{"alt":"DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694 - Diftech","id":2790558269503,"position":1,"preview_image":{"aspect_ratio":1.408,"height":1376,"width":1938,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_4d41764f-f0d1-465a-8c05-5db397bee8ae.jpg?v=1571609577"},"aspect_ratio":1.408,"height":1376,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_4d41764f-f0d1-465a-8c05-5db397bee8ae.jpg?v=1571609577","width":1938},{"alt":"DIFtech Rear Adjustable Camber Arms for Alfa Romeo Giulia UCA Bearing type 10694 - Diftech","id":2790558236735,"position":2,"preview_image":{"aspect_ratio":1.335,"height":1802,"width":2405,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_d3dc091c-a940-43d5-84b1-d9c47c1e8076.jpg?v=1571609577"},"aspect_ratio":1.335,"height":1802,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_d3dc091c-a940-43d5-84b1-d9c47c1e8076.jpg?v=1571609577","width":2405}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits Alfa Romeo Giulia rear suspension\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpherical bearing type\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOver 5.0 degrees of camber adjustment\u003c\/li\u003e\n\u003cli\u003eDesigned for increased camber or camber correction\u003c\/li\u003e\n\u003cli\u003eEasy to use turnbuckle adjuster\u003c\/li\u003e\n\u003cli\u003ePreload washers used to ensure consistent adjustment\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n\u003cli\u003eHeavy duty 7\/8\" FK wide series spherical bearings\u003c\/li\u003e\n\u003cli\u003eAnodized grey finish for aesthetics and durability\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese bearing-type rear adjustable camber arms for the Alfa Romeo Giulia chassis are designed to give enthusiasts ultimate flexibility in rear alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustment range is huge! From a positive, \"camber correction\" position for lowered cars wanting to retain minimal camber, to a full race or show car negative setting. The turnbuckle adjuster allows tuners to easily dial in the right amount of camber for their particular setup. Preload washers are also used so that camber can be set without worrying about it shifting or moving when you lock down the jam nuts. Your alignment guy will thank you.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. This arm uses a spherical bearing to eliminate deflection under heavy cornering loads. DIFtech uses high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e Easy, bolt-up installation takes about an hour.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e"}

$ 500.00

Returns Policy

Shipping

Other products that may fit your vehicle.

Recently Viewed Products