DIFtech Front Adjustable Camber Plates for BMW E46 M3 Clocking Adjustm

DIFtech Front Adjustable Camber Plates for BMW E46 M3 Clocking Adjustment 10678

DIFtech

Fits E46 M3 Front

True coaxial design for reduced shock bind and increased traction

4+ degrees of camber adjustment!

Unique 'clocking' type adjustment ensures maximum adjustment range

Strong and lightweight 6061-T6 aerospace aluminum alloy

Heavy...

$ 525.00

Fits E46 M3 Front

True coaxial design for reduced shock bind and increased traction

4+ degrees of camber adjustment!

Unique 'clocking' type adjustment ensures maximum adjustment range

Strong and lightweight 6061-T6 aerospace aluminum alloy

Heavy duty 3/4" FK wide series spherical bearings

Anodized black and grey finish for looks and durability

Install kit required (available for each shock brand)

Custom install kits available (email us for your custom application)

Engineered, fabricated, and tested in the United States

These adjustable camber/caster plates for the E46 M3 are designed to give M enthusiasts ultimate flexibility in front alignment. This high strength, lightweight package works for daily driven cars, as well as track day/autocross cars. Camber is adjustable from a positive, "camber correction" position to a full race negative setting. DIFtech's one-of-a-kind clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can achieve 4.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.

Made in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. On-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.

NOTE: This listing for camber plates only. Install kit including spring retainer is required for installation to specific dampers.

NOTE: For M3 only. While these will bolt in on a non-M E46 chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Customer Reviews

Based on 1 review Review this product

Other products that may fit your vehicle.

DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15 - Diftech

Sold Out

DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15 {"id":1801473622079,"title":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15","handle":"diftech-front-adjustable-camber-plates-for-bmw-e46-m3-mcs-remote-10678-15","description":"\u003cli\u003eFits E46 M3 Front\u003c\/li\u003e\n\u003cli\u003eFits MCS struts with 1-way or 2-way adjusters\u003c\/li\u003e\n\u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n\u003cli\u003e4+ degrees of camber adjustment!\u003c\/li\u003e\n\u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n\u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n\u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n\u003cli\u003eIncludes MCS Remote install kit\u003c\/li\u003e\n\u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese adjustable camber\/caster plates for the E46 M3 are designed to give M enthusiasts ultimate flexibility in front alignment while running MCS dampers. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. Diftech's one of a kinda clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can achieve 4.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n\u003cp\u003eEverything you need to install on MCS remote coilover kits is included in this listing, including coaxial, bearing-mounted spring retainer for 2.250 inch spring and a hardware package specifically design for MCS 1WNR, 2WNR, and 2W coilover kits.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for unlisted applications. Don't be bashful. It's what we do.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E46 chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-04-22T16:31:31-07:00","created_at":"2019-04-22T16:31:34-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["3 Series","BMW","E46","M3"],"price":70000,"price_min":70000,"price_max":70000,"available":false,"price_varies":false,"compare_at_price":70000,"compare_at_price_min":70000,"compare_at_price_max":70000,"compare_at_price_varies":false,"variants":[{"id":14702035370047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10678-15","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15","public_title":null,"options":["Default Title"],"price":70000,"weight":3629,"compare_at_price":70000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395689057","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_41b0322a-ddad-4764-a2fb-0435e21b0e09.jpg?v=1579782065","\/\/diftech.com\/cdn\/shop\/products\/image_a01acb2a-9be0-4cf7-9635-28e8116d9d18.jpg?v=1579782065","\/\/diftech.com\/cdn\/shop\/products\/image_0952e776-3244-4f74-b683-db944b474616.jpg?v=1579782065"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_41b0322a-ddad-4764-a2fb-0435e21b0e09.jpg?v=1579782065","options":["Title"],"media":[{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15 - Diftech","id":3616651313215,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_41b0322a-ddad-4764-a2fb-0435e21b0e09.jpg?v=1579782065"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_41b0322a-ddad-4764-a2fb-0435e21b0e09.jpg?v=1579782065","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15 - Diftech","id":3616651345983,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_a01acb2a-9be0-4cf7-9635-28e8116d9d18.jpg?v=1579782065"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_a01acb2a-9be0-4cf7-9635-28e8116d9d18.jpg?v=1579782065","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 MCS All 10678-15 - Diftech","id":5738228416575,"position":3,"preview_image":{"aspect_ratio":1.333,"height":2794,"width":3725,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_0952e776-3244-4f74-b683-db944b474616.jpg?v=1579782065"},"aspect_ratio":1.333,"height":2794,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_0952e776-3244-4f74-b683-db944b474616.jpg?v=1579782065","width":3725}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits E46 M3 Front\u003c\/li\u003e\n\u003cli\u003eFits MCS struts with 1-way or 2-way adjusters\u003c\/li\u003e\n\u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n\u003cli\u003e4+ degrees of camber adjustment!\u003c\/li\u003e\n\u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n\u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n\u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n\u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n\u003cli\u003eIncludes MCS Remote install kit\u003c\/li\u003e\n\u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese adjustable camber\/caster plates for the E46 M3 are designed to give M enthusiasts ultimate flexibility in front alignment while running MCS dampers. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. Diftech's one of a kinda clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can achieve 4.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n\u003cp\u003eEverything you need to install on MCS remote coilover kits is included in this listing, including coaxial, bearing-mounted spring retainer for 2.250 inch spring and a hardware package specifically design for MCS 1WNR, 2WNR, and 2W coilover kits.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for unlisted applications. Don't be bashful. It's what we do.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E46 chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e"}

$ 700.00

DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R&T 10678-02 - Diftech

Sold Out

DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R&T 10678-02 {"id":175811395611,"title":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02","handle":"adjustable-camber-caster-plates-fits-bmw-e46-m3-ohlins-r-t-front","description":"\u003cli\u003eFits E46 M3 Front\u003c\/li\u003e\n \u003cli\u003eFits Ohlins Road \u0026amp; Track coilover kit\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003e4+ degrees of camber adjustment!\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eIncludes Ohlins Road \u0026amp; Track install kit\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E46 M3 are designed to give M enthusiasts ultimate flexibility in front alignment while running Ohlins dampers. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. Diftech's one of a kinda clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can achieve 4.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eEverything you need to install on \u003cspan\u003eOhlins Road \u0026amp; Track coilover kits is included in this listing, including coaxial, bearing-mounted spring retainer for 103mm stock style spring and a hardware package specifically design for the R\u0026amp;T kit. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for unlisted applications. Don't be bashful. It's what we do.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E46 chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-05-06T11:18:11-07:00","created_at":"2017-10-09T16:54:06-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["3 Series","BMW","E46","M3"],"price":70000,"price_min":70000,"price_max":70000,"available":false,"price_varies":false,"compare_at_price":70000,"compare_at_price_min":70000,"compare_at_price_max":70000,"compare_at_price_varies":false,"variants":[{"id":2346218192923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10678-02","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02","public_title":null,"options":["Default Title"],"price":70000,"weight":3629,"compare_at_price":70000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686353","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_817927bc-a86e-46da-b2b5-0a0c4aaa7345.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_3c9dcfce-5117-4486-83e8-7832b442ba6b.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_70bb34e3-4ecf-46a9-b29e-a973c1e13784.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_d9180bf2-e81b-42ac-bb2d-176f7cc247aa.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/image_768288db-ffc1-4a0e-8110-cb7147a028ad.jpg?v=1571609577"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_817927bc-a86e-46da-b2b5-0a0c4aaa7345.jpg?v=1571609577","options":["Title"],"media":[{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02 - Diftech","id":2691168174143,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_817927bc-a86e-46da-b2b5-0a0c4aaa7345.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_817927bc-a86e-46da-b2b5-0a0c4aaa7345.jpg?v=1571609577","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02 - Diftech","id":2691159588927,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c9dcfce-5117-4486-83e8-7832b442ba6b.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c9dcfce-5117-4486-83e8-7832b442ba6b.jpg?v=1571609577","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02 - Diftech","id":2691159556159,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_70bb34e3-4ecf-46a9-b29e-a973c1e13784.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_70bb34e3-4ecf-46a9-b29e-a973c1e13784.jpg?v=1571609577","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02 - Diftech","id":2691159654463,"position":4,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_d9180bf2-e81b-42ac-bb2d-176f7cc247aa.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_d9180bf2-e81b-42ac-bb2d-176f7cc247aa.jpg?v=1571609577","width":2448},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E46 M3 Ohlins R\u0026T 10678-02 - Diftech","id":2691159851071,"position":5,"preview_image":{"aspect_ratio":1.334,"height":1835,"width":2448,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_768288db-ffc1-4a0e-8110-cb7147a028ad.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1835,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_768288db-ffc1-4a0e-8110-cb7147a028ad.jpg?v=1571609577","width":2448}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits E46 M3 Front\u003c\/li\u003e\n \u003cli\u003eFits Ohlins Road \u0026amp; Track coilover kit\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003e4+ degrees of camber adjustment!\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eIncludes Ohlins Road \u0026amp; Track install kit\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E46 M3 are designed to give M enthusiasts ultimate flexibility in front alignment while running Ohlins dampers. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. Diftech's one of a kinda clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can achieve 4.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eEverything you need to install on \u003cspan\u003eOhlins Road \u0026amp; Track coilover kits is included in this listing, including coaxial, bearing-mounted spring retainer for 103mm stock style spring and a hardware package specifically design for the R\u0026amp;T kit. \u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for unlisted applications. Don't be bashful. It's what we do.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E46 chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e"}

$ 700.00

DIFtech Front Adjustable Camber Plates for BMW E90-E92 M3 KW Variant 3 10683-01 - Diftech

Sold Out

DIFtech Front Adjustable Camber Plates for BMW E90-E92 M3 KW Variant 3 10683-01 {"id":741641846888,"title":"DIFtech Front Adjustable Camber Plates for BMW E90-E92 M3 KW Variant 3 10683-01","handle":"diftech-10684-adjustable-camber-caster-plates-fits-bmw-e90-e92-m3-kw-variant-3-front","description":"\u003cli\u003eFits E90 E91 and E92 M3 Front\u003c\/li\u003e\n \u003cli\u003eFits KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003eOver 3.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E92 M3 are designed to give M enthusiasts running KW V3 coilovers ultimate flexibility in front alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. DIFtech's one-of-a-kind clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can deliver over 3.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All DIFtech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eThis kit includes bearing mounted spring retainers and BMW isolators specifically for KW barrel type springs. This is a one stop, bolt-on kit.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E9x chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-05-06T11:18:18-07:00","created_at":"2018-04-05T14:10:05-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["3 Series","BMW","E90","E91","E92","M3"],"price":70000,"price_min":70000,"price_max":70000,"available":false,"price_varies":false,"compare_at_price":70000,"compare_at_price_min":70000,"compare_at_price_max":70000,"compare_at_price_varies":false,"variants":[{"id":8104376565864,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10683-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Adjustable Camber Plates for BMW E90-E92 M3 KW Variant 3 10683-01","public_title":null,"options":["Default Title"],"price":70000,"weight":3402,"compare_at_price":70000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686377","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_73d23f3f-2263-460b-8df4-72e16918043a.jpg?v=1571609578"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_73d23f3f-2263-460b-8df4-72e16918043a.jpg?v=1571609578","options":["Title"],"media":[{"alt":"DIFtech Front Adjustable Camber Plates for BMW E90-E92 M3 KW Variant 3 10683-01 - Diftech","id":3003562426431,"position":1,"preview_image":{"aspect_ratio":1.334,"height":2192,"width":2924,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_73d23f3f-2263-460b-8df4-72e16918043a.jpg?v=1571609578"},"aspect_ratio":1.334,"height":2192,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_73d23f3f-2263-460b-8df4-72e16918043a.jpg?v=1571609578","width":2924}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits E90 E91 and E92 M3 Front\u003c\/li\u003e\n \u003cli\u003eFits KW Variant 3 coilovers\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003eOver 3.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kits also available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E92 M3 are designed to give M enthusiasts running KW V3 coilovers ultimate flexibility in front alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. DIFtech's one-of-a-kind clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can deliver over 3.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All DIFtech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eThis kit includes bearing mounted spring retainers and BMW isolators specifically for KW barrel type springs. This is a one stop, bolt-on kit.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E9x chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e"}

$ 700.00

DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683 - Diftech

Sold Out

DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683 {"id":180319879195,"title":"DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683","handle":"adjustable-camber-caster-coilover-plates-fits-bmw-e92-m3-front","description":"\u003cli\u003eFits E90 E91 and E92 M3 Front\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003eOver 3.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E92 M3 are designed to give M enthusiasts ultimate flexibility in front alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. DIFtech's one-of-a-kind clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can deliver over 3.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All DIFtech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This listing for camber plates only. Install kit including spring retainer is required for installation to specific dampers.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E9x chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-10T10:46:08-07:00","created_at":"2017-10-10T10:48:49-07:00","vendor":"DIFtech","type":"Top Hat","tags":["3 Series","BMW","E90","E91","E92","M3"],"price":52500,"price_min":52500,"price_max":52500,"available":false,"price_varies":false,"compare_at_price":52500,"compare_at_price_min":52500,"compare_at_price_max":52500,"compare_at_price_varies":false,"variants":[{"id":14531069182015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10683","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683","public_title":null,"options":["Default Title"],"price":52500,"weight":1928,"compare_at_price":52500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686360","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_6c6695b9-a40d-4a76-aef0-199dfd3342b9.jpg?v=1571609577","\/\/diftech.com\/cdn\/shop\/products\/10683-01.jpg?v=1571609577"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_6c6695b9-a40d-4a76-aef0-199dfd3342b9.jpg?v=1571609577","options":["Title"],"media":[{"alt":"DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683 - Diftech","id":2694834061375,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1817,"width":2424,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_6c6695b9-a40d-4a76-aef0-199dfd3342b9.jpg?v=1571609577"},"aspect_ratio":1.334,"height":1817,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_6c6695b9-a40d-4a76-aef0-199dfd3342b9.jpg?v=1571609577","width":2424},{"alt":"DIFtech Front Adjustable Camber Plates for BMW E92 M3 Clocking Adjustment 10683 - Diftech","id":3190868607039,"position":2,"preview_image":{"aspect_ratio":1.333,"height":450,"width":600,"src":"\/\/diftech.com\/cdn\/shop\/products\/10683-01.jpg?v=1571609577"},"aspect_ratio":1.333,"height":450,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/10683-01.jpg?v=1571609577","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cli\u003eFits E90 E91 and E92 M3 Front\u003c\/li\u003e\n \u003cli\u003eTrue coaxial design for reduced shock bind and increased traction\u003c\/li\u003e\n \u003cli\u003eOver 3.5 degrees of camber adjustment\u003c\/li\u003e\n \u003cli\u003eUnique 'clocking' type adjustment ensures maximum adjustment range\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061-T6 aerospace aluminum alloy\u003c\/li\u003e\n \u003cli\u003eHeavy duty 3\/4\" FK wide series spherical bearings\u003c\/li\u003e\n \u003cli\u003eAnodized black and grey finish for looks and durability\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003cp\u003e \u003c\/p\u003e\n \u003cp\u003eThese adjustable camber\/caster plates for the E92 M3 are designed to give M enthusiasts ultimate flexibility in front alignment. This high strength, lightweight package works for daily driven cars, as well as track day\/autocross cars. Camber is adjustable from a positive, \"camber correction\" position to a full race negative setting. DIFtech's one-of-a-kind clocking adjuster allows tuners to easily fine tune the trade-off between camber and caster that works best for their particular setup. These plates can deliver over 3.5 degrees of negative camber for autocross or show cars, or be dialed back to less camber and increased caster for track day and road race cars. Slider adjustment can also be pulled back for less aggressive setups.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. These extended top hats also free up shock stroke and limit droop to allow you to run lower ride heights without bottoming out the damper. All DIFtech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation.\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eOn-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This listing for camber plates only. Install kit including spring retainer is required for installation to specific dampers.\u003c\/span\u003e\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For M3 only. While these will bolt in on a non-M E9x chassis, lower knuckle design is different and will result in alignment geometry that is untested with this plate.\u003c\/span\u003e\u003c\/p\u003e"}

$ 525.00

DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724 - Diftech

Sale Sold Out

DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724 {"id":9251593036,"title":"DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724","handle":"rear-articulating-weight-jack-spring-perch-bmw-e46","description":"\u003cul\u003e\n\u003cli\u003eFits BMW E46 3-series chassis\u003c\/li\u003e\n\u003cli\u003eArticulated spring perches ensure consistent spring rate\u003c\/li\u003e\n\u003cli\u003eSimple under-body ride height adjustment\u003c\/li\u003e\n\u003cli\u003eFull articulation capability at all ride heights\u003c\/li\u003e\n\u003cli\u003eEasy-to-use detent style adjuster\u003c\/li\u003e\n\u003cli\u003eDesigned to work with 65mm diameter x 5\" (127mm) long springs\u003c\/li\u003e\n\u003cli\u003eComplete kit includes mounting hardware\u003c\/li\u003e\n\u003cli\u003eSprings\u003cem\u003e\u003cspan\u003e \u003c\/span\u003enot\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eincluded\u003c\/li\u003e\n\u003cli\u003eMade from high strength, aerospace alloys\u003c\/li\u003e\n\u003cli\u003eAnodized finish for look and durability\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinally on the market, DiFtech's articulating rear spring perch for E46 M3 and 3-series! This kit is the absolute best way to convert your stock rear spring setup into an adjustable performance setup. The ride height adjuster is moved to the under side of the rear control arm for easy adjustment without removing the wheels. The adjuster is made with spring detents to give adjustment reference points and to hold the adjustment in place while the spring is unloaded. Most importantly, the spherical mounted articulating spring perches eliminate the angular influence that the rear control arm has on the spring as the arm swings, allowing your linear race springs to stay linear. These DiFtech units are completely free to articulate all the way down to the minimum ride height setting, where you're likely to run most race cars. Similar products on the market use a cone-in-cone design which locks down at lower ride heights and doesn't swing at all.\u003c\/p\u003e\n\u003cp\u003eThe spring-on-arm location on the E46 chassis is great for minimizing shock bind and freeing up room in the rear wheel wells, but it comes with its own problems. As the suspension is compressed and the arm swings upward, the locating angles of the upper and lower spring faces change. This results in the spring loading unevenly and, therefore in a non-linear fashion; meaning that your carefully chosen spring rates aren't doing what they're calculated to do. This articulating perch system eliminates that problem and allows linear race springs to work in their free state, resulting in a more planted and predictable back-end of your competition M3. Under-body adjustment is a breeze with a simple 14mm hex and detents every 1\/4 turn. If you are looking for quality rear ride height adjusters for your track E46 build, look no further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eCheck your rulebook for your specific racing class compliance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDIFtech only recommends using this kit with 5\" or 127mm long springs for proper ride height range. This kit includes 65mm spring retainers. Custom diameter sizing available upon request.\u003c\/p\u003e","published_at":"2016-12-21T20:05:31-08:00","created_at":"2016-12-21T20:05:31-08:00","vendor":"DIFtech","type":"Articulating Spring Perch","tags":["3 Series","BMW","E46","M3"],"price":40000,"price_min":40000,"price_max":40000,"available":false,"price_varies":false,"compare_at_price":50000,"compare_at_price_min":50000,"compare_at_price_max":50000,"compare_at_price_varies":false,"variants":[{"id":32045253132,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10724","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724","public_title":null,"options":["Default Title"],"price":40000,"weight":1814,"compare_at_price":50000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686780","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_a81669d2-b8d0-4759-bf1c-4ece82faadc1.jpg?v=1571609573","\/\/diftech.com\/cdn\/shop\/products\/image_d77e3271-5f8e-4e47-9f34-5949a926abc6.jpg?v=1571609573","\/\/diftech.com\/cdn\/shop\/products\/image_edb1074c-a4b8-41ca-b86e-eb1ee71d9e70.jpg?v=1571609573"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_a81669d2-b8d0-4759-bf1c-4ece82faadc1.jpg?v=1571609573","options":["Title"],"media":[{"alt":"DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724 - Diftech","id":3093439774783,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1575,"width":2099,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_a81669d2-b8d0-4759-bf1c-4ece82faadc1.jpg?v=1571609573"},"aspect_ratio":1.333,"height":1575,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_a81669d2-b8d0-4759-bf1c-4ece82faadc1.jpg?v=1571609573","width":2099},{"alt":"DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724 - Diftech","id":3093397012543,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1575,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_d77e3271-5f8e-4e47-9f34-5949a926abc6.jpg?v=1571609573"},"aspect_ratio":1.333,"height":1575,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_d77e3271-5f8e-4e47-9f34-5949a926abc6.jpg?v=1571609573","width":2100},{"alt":"DIFtech Rear Articulating Perch kit for BMW E46 M3 Under-body Adjuster 10724 - Diftech","id":3093439447103,"position":3,"preview_image":{"aspect_ratio":1.334,"height":2109,"width":2814,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_edb1074c-a4b8-41ca-b86e-eb1ee71d9e70.jpg?v=1571609573"},"aspect_ratio":1.334,"height":2109,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_edb1074c-a4b8-41ca-b86e-eb1ee71d9e70.jpg?v=1571609573","width":2814}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits BMW E46 3-series chassis\u003c\/li\u003e\n\u003cli\u003eArticulated spring perches ensure consistent spring rate\u003c\/li\u003e\n\u003cli\u003eSimple under-body ride height adjustment\u003c\/li\u003e\n\u003cli\u003eFull articulation capability at all ride heights\u003c\/li\u003e\n\u003cli\u003eEasy-to-use detent style adjuster\u003c\/li\u003e\n\u003cli\u003eDesigned to work with 65mm diameter x 5\" (127mm) long springs\u003c\/li\u003e\n\u003cli\u003eComplete kit includes mounting hardware\u003c\/li\u003e\n\u003cli\u003eSprings\u003cem\u003e\u003cspan\u003e \u003c\/span\u003enot\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eincluded\u003c\/li\u003e\n\u003cli\u003eMade from high strength, aerospace alloys\u003c\/li\u003e\n\u003cli\u003eAnodized finish for look and durability\u003c\/li\u003e\n\u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinally on the market, DiFtech's articulating rear spring perch for E46 M3 and 3-series! This kit is the absolute best way to convert your stock rear spring setup into an adjustable performance setup. The ride height adjuster is moved to the under side of the rear control arm for easy adjustment without removing the wheels. The adjuster is made with spring detents to give adjustment reference points and to hold the adjustment in place while the spring is unloaded. Most importantly, the spherical mounted articulating spring perches eliminate the angular influence that the rear control arm has on the spring as the arm swings, allowing your linear race springs to stay linear. These DiFtech units are completely free to articulate all the way down to the minimum ride height setting, where you're likely to run most race cars. Similar products on the market use a cone-in-cone design which locks down at lower ride heights and doesn't swing at all.\u003c\/p\u003e\n\u003cp\u003eThe spring-on-arm location on the E46 chassis is great for minimizing shock bind and freeing up room in the rear wheel wells, but it comes with its own problems. As the suspension is compressed and the arm swings upward, the locating angles of the upper and lower spring faces change. This results in the spring loading unevenly and, therefore in a non-linear fashion; meaning that your carefully chosen spring rates aren't doing what they're calculated to do. This articulating perch system eliminates that problem and allows linear race springs to work in their free state, resulting in a more planted and predictable back-end of your competition M3. Under-body adjustment is a breeze with a simple 14mm hex and detents every 1\/4 turn. If you are looking for quality rear ride height adjusters for your track E46 build, look no further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eCheck your rulebook for your specific racing class compliance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDIFtech only recommends using this kit with 5\" or 127mm long springs for proper ride height range. This kit includes 65mm spring retainers. Custom diameter sizing available upon request.\u003c\/p\u003e"}

$ 500.00 $ 400.00

DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627 - Diftech

Sale Sold Out

DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627 {"id":9251598540,"title":"DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627","handle":"e36-rear-shock-mount","description":"\u003cul\u003e\n \u003cli\u003eFits BMW M3 and 3 series. E36 chassis only\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eIncludes all hardware needed for mounting to stock type damper\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e5\/8\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the E36 chassis are designed to convert to an upper bearing type mount, and allow maximum compression stroke in the process. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your E36 3 series. It also uses a raised design so that long shock bodies won't bottom out on lowered cars. With these hats sleeves can be flipped to optimize droop and free up as much compression stroke as possible.\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eStock E36 \u003c\/span\u003emounts are a rubber bushing setup, which allows lots of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. In extreme cases, the stock rubber bushings have even been known to pull out of their mounts. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eNote: This hat is for E36 only and will not work with E46. For E46, search 10663 \u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Diftech hardware kit included to fit to stock and stock type dampers with an M10 x 1.0 shaft. \u003cspan\u003eCustomers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cul\u003e\u003c\/ul\u003e","published_at":"2016-12-21T20:06:08-08:00","created_at":"2016-12-21T20:06:09-08:00","vendor":"DIFtech","type":"Top Hat","tags":["3 Series","BMW","E36","M3"],"price":14000,"price_min":14000,"price_max":14000,"available":false,"price_varies":false,"compare_at_price":17000,"compare_at_price_min":17000,"compare_at_price_max":17000,"compare_at_price_varies":false,"variants":[{"id":32045258828,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10627","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627","public_title":null,"options":["Default Title"],"price":14000,"weight":567,"compare_at_price":17000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395684342","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_94d0edc3-a07d-40e5-993b-a9d0b5710a9b.jpg?v=1571609575","\/\/diftech.com\/cdn\/shop\/products\/image_929cb1de-ee17-466e-a11c-f7accae2eccc.jpg?v=1571609575"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_94d0edc3-a07d-40e5-993b-a9d0b5710a9b.jpg?v=1571609575","options":["Title"],"media":[{"alt":"DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627 - Diftech","id":2490560708671,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1709,"width":2278,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_94d0edc3-a07d-40e5-993b-a9d0b5710a9b.jpg?v=1571609575"},"aspect_ratio":1.333,"height":1709,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_94d0edc3-a07d-40e5-993b-a9d0b5710a9b.jpg?v=1571609575","width":2278},{"alt":"DIFtech Rear Shock Hats for BMW E36 3 Series Extended Suspension Mounts M3 10627 - Diftech","id":2490560741439,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1437,"width":1915,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_929cb1de-ee17-466e-a11c-f7accae2eccc.jpg?v=1571609575"},"aspect_ratio":1.333,"height":1437,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_929cb1de-ee17-466e-a11c-f7accae2eccc.jpg?v=1571609575","width":1915}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits BMW M3 and 3 series. E36 chassis only\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eIncludes all hardware needed for mounting to stock type damper\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e5\/8\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the E36 chassis are designed to convert to an upper bearing type mount, and allow maximum compression stroke in the process. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your E36 3 series. It also uses a raised design so that long shock bodies won't bottom out on lowered cars. With these hats sleeves can be flipped to optimize droop and free up as much compression stroke as possible.\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eStock E36 \u003c\/span\u003emounts are a rubber bushing setup, which allows lots of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. In extreme cases, the stock rubber bushings have even been known to pull out of their mounts. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eNote: This hat is for E36 only and will not work with E46. For E46, search 10663 \u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Diftech hardware kit included to fit to stock and stock type dampers with an M10 x 1.0 shaft. \u003cspan\u003eCustomers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e\n \u003cul\u003e\u003c\/ul\u003e"}

$ 170.00 $ 140.00

DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663 - Diftech

Sale Sold Out

DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663 {"id":11528511692,"title":"DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663","handle":"shock-upper-mount-suspension-top-hat-fits-bmw-e46-rear","description":"\u003cul\u003e\n \u003cli\u003eFits BMW M3 and other 3 series. E46 chassis only\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eIncludes all hardware needed for mounting to stock type damper\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e5\/8\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the E46 chassis are designed to convert to an upper bearing type mount, and allow maximum compression stroke in the process. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your E46 3 series. It also uses a raised design so that long shock bodies won't bottom out on lowered cars. With these hats sleeves can be flipped to optimize droop and free up as much compression stroke as possible.\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eStock E46 \u003c\/span\u003emounts are a rubber bushing setup, which allows lots of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. In extreme cases, the stock rubber bushings have even been known to pull out of their mounts. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eNote: This hat is for E46 only. For E36 search 10627\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Diftech hardware kit included to fit to stock and stock type dampers with an M10 x 1.0 shaft. \u003cspan\u003eCustomers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-16T09:43:28-07:00","created_at":"2017-08-16T09:46:22-07:00","vendor":"DIFtech","type":"Top Hat","tags":["3 Series","BMW","E46","M3"],"price":14000,"price_min":14000,"price_max":14000,"available":false,"price_varies":false,"compare_at_price":17000,"compare_at_price_min":17000,"compare_at_price_max":17000,"compare_at_price_varies":false,"variants":[{"id":43731977164,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10663","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663","public_title":null,"options":["Default Title"],"price":14000,"weight":567,"compare_at_price":17000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395686162","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_50e71c1b-e20b-47f5-a307-f9acb08277dd.jpg?v=1571609576","\/\/diftech.com\/cdn\/shop\/products\/image_1d896ef1-1a98-40d9-ac93-d60608c379d7.jpg?v=1571609576"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_50e71c1b-e20b-47f5-a307-f9acb08277dd.jpg?v=1571609576","options":["Title"],"media":[{"alt":"DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663 - Diftech","id":2490798047295,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1709,"width":2278,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_50e71c1b-e20b-47f5-a307-f9acb08277dd.jpg?v=1571609576"},"aspect_ratio":1.333,"height":1709,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_50e71c1b-e20b-47f5-a307-f9acb08277dd.jpg?v=1571609576","width":2278},{"alt":"DIFtech Rear Shock Hats for BMW E46 3 Series Extended Suspension Mounts M3 10663 - Diftech","id":2490798080063,"position":2,"preview_image":{"aspect_ratio":1.333,"height":1437,"width":1915,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_1d896ef1-1a98-40d9-ac93-d60608c379d7.jpg?v=1571609576"},"aspect_ratio":1.333,"height":1437,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_1d896ef1-1a98-40d9-ac93-d60608c379d7.jpg?v=1571609576","width":1915}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits BMW M3 and other 3 series. E46 chassis only\u003c\/li\u003e\n \u003cli\u003eIncreased damper response and durability\u003c\/li\u003e\n \u003cli\u003eIncludes all hardware needed for mounting to stock type damper\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eStrong and lightweight 6061 Aluminum construction\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for look and durability\u003c\/li\u003e\n \u003cli\u003e5\/8\" FK wide-series spherical bearings\u003c\/li\u003e\n \u003cli\u003eEngineered, fabricated, and tested in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended rear top mounts (hats) for the E46 chassis are designed to convert to an upper bearing type mount, and allow maximum compression stroke in the process. This compact, lightweight package is designed to eliminate bushing compliance and give you the control you need in the rear of your E46 3 series. It also uses a raised design so that long shock bodies won't bottom out on lowered cars. With these hats sleeves can be flipped to optimize droop and free up as much compression stroke as possible.\u003c\/p\u003e\n \u003cp\u003e\u003cspan\u003eStock E46 \u003c\/span\u003emounts are a rubber bushing setup, which allows lots of deflection under high loads. This is great for ride comfort and noise, but not ideal for controlling a high spring rate in aggressive driving conditions. As spring rates, and therefore dampening forces go up, the damper can't effectively do its job because the top of the shaft is not mounted securely. In extreme cases, the stock rubber bushings have even been known to pull out of their mounts. This kit eliminates bushing deflection in a more durable package.\u003c\/p\u003e\n \u003cp\u003eNote: This hat is for E46 only. For E36 search 10627\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech hats use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Diftech hardware kit included to fit to stock and stock type dampers with an M10 x 1.0 shaft. \u003cspan\u003eCustomers can email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e"}

$ 170.00 $ 140.00

Sold Out

DIFtech Top Hat Install Kit FRONT for BMW E46 M3 w/ Ohlins R&T 10678-52

$ 175.00

Returns Policy

Shipping

Customer Reviews

Other products that may fit your vehicle.

Recently Viewed Products