DIFtech Offset Camber Bushing Front Lower Knuckle for Mazda RX8 S1 Cha

DIFtech Offset Camber Bushing Front Lower Knuckle for Mazda RX8 S1 Chassis 10633

DIFtech

*Fits Mazda RX8 S1 chassis 2003-2008

*Increases front camber by .5 degrees

*Made from heat-treated alloy steel

*Plated coated for corrosion resistance

*Engineered, tested, and manufactured in the United States

Diftech is proud to offer a simple solution for...

$ 70.00

/ Mazda / RX-8 / S1 / SE3P

*Fits Mazda RX8 S1 chassis 2003-2008

*Increases front camber by .5 degrees

*Made from heat-treated alloy steel

*Plated coated for corrosion resistance

*Engineered, tested, and manufactured in the United States

Diftech is proud to offer a simple solution for adding camber to your series 1 RX8. These offset lower bushings (previously unavailable to series 1 RX-8 owners) press into the front knuckle and give you an easy half-degree more negative camber. Great for anyone looking for more grip or even just a more aggressive look. Alignment hash marks allow precise orientation of bushing. Sold in pairs

NOTE: Make sure bushing orientation is correct before pressing into knuckle. Engraved DIFtech logo should be towards the outside of the car. Knuckle pictured for reference only.
It is recommended that you recheck the torque of the ball-joint nut periodically in the months after installation until bushings reach their final seated position in the knuckle.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Customer Reviews

Based on 2 reviews Review this product

Other products that may fit your vehicle.

DIFtech Clutch Line for Mazda RX7 FC Stainless Steel Braided Fire Sleeved 10097 - Diftech

Sold Out

DIFtech Clutch Line for Mazda RX7 FC Stainless Steel Braided Fire Sleeved 10097 {"id":9251543756,"title":"DIFtech Clutch Line for Mazda RX7 FC Stainless Steel Braided Fire Sleeved 10097","handle":"stainless-steel-braided-clutch-line-rx-7-fc3","description":"\u003cul\u003e\n \u003cli\u003eHigh pressure braided stainless steel\u003c\/li\u003e\n \u003cli\u003eFits Mazda RX7 series 3 ( FC chassis )\u003c\/li\u003e\n \u003cli\u003eImproves clutch feel and consistency\u003c\/li\u003e\n \u003cli\u003eCNCed high-pressure fittings for precise fitment \u003c\/li\u003e\n \u003cli\u003eFire sleeved for added durability and consistent performance\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eDIFtech high pressure, braided stainless clutch line for RX7 FC chassis. Includes fire sleeve to ensure consistent performance and for added protection for your clutch fluid against engine and exhaust heat. DIFtech's braided lines are engineered and tested to withstand the most demanding environments and offer precise, reliable service for years to come.\u003c\/p\u003e","published_at":"2018-03-13T19:52:31-07:00","created_at":"2016-12-21T19:24:23-08:00","vendor":"DIFtech","type":"Clutch Hydraulic Line","tags":["13B-REW","FC","Mazda","RX-7"],"price":2500,"price_min":2500,"price_max":2500,"available":false,"price_varies":false,"compare_at_price":2500,"compare_at_price_min":2500,"compare_at_price_max":2500,"compare_at_price_varies":false,"variants":[{"id":32045020236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10097","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Clutch Line for Mazda RX7 FC Stainless Steel Braided Fire Sleeved 10097","public_title":null,"options":["Default Title"],"price":2500,"weight":454,"compare_at_price":2500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395683567","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_dc972890-9a05-4d54-b965-72e0e159ce98.jpg?v=1571609572"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_dc972890-9a05-4d54-b965-72e0e159ce98.jpg?v=1571609572","options":["Title"],"media":[{"alt":"DIFtech Clutch Line for Mazda RX7 FC Stainless Steel Braided Fire Sleeved 10097 - Diftech","id":3003583135807,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1574,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_dc972890-9a05-4d54-b965-72e0e159ce98.jpg?v=1571609572"},"aspect_ratio":1.334,"height":1574,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_dc972890-9a05-4d54-b965-72e0e159ce98.jpg?v=1571609572","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eHigh pressure braided stainless steel\u003c\/li\u003e\n \u003cli\u003eFits Mazda RX7 series 3 ( FC chassis )\u003c\/li\u003e\n \u003cli\u003eImproves clutch feel and consistency\u003c\/li\u003e\n \u003cli\u003eCNCed high-pressure fittings for precise fitment \u003c\/li\u003e\n \u003cli\u003eFire sleeved for added durability and consistent performance\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eDIFtech high pressure, braided stainless clutch line for RX7 FC chassis. Includes fire sleeve to ensure consistent performance and for added protection for your clutch fluid against engine and exhaust heat. DIFtech's braided lines are engineered and tested to withstand the most demanding environments and offer precise, reliable service for years to come.\u003c\/p\u003e"}

$ 25.00

DIFtech Clutch Line for Mazda RX8 SE3P 2003-2012 Braided SS Firesleeved 10448 - Diftech

Sold Out

DIFtech Clutch Line for Mazda RX8 SE3P 2003-2012 Braided SS Firesleeved 10448 {"id":5403948550,"title":"DIFtech Clutch Line for Mazda RX8 SE3P 2003-2012 Braided SS Firesleeved 10448","handle":"stainless-steel-clutch-line-03-11-mazda-rx8-33466","description":"\u003cp\u003e\u003cstrong\u003eDIFtech Stainless Steel Braided Clutch Line\u003c\/strong\u003e for the Mazda RX8 chassis. Braided lines improve clutch pedal feel and make the driving sensation more direct. DIF clutch lines are fire sleeved which protects the fluid from exhaust heat and prevents boiling. It also adds a layer of protection against pinching and road debris. If you're doing a clutch job on your RX8, this is a great upgrade!\u003c\/p\u003e\n \u003cp\u003e12.5\" Overall length\u003c\/p\u003e","published_at":"2016-03-16T13:22:10-07:00","created_at":"2016-03-16T13:22:10-07:00","vendor":"DIFtech","type":"Clutch Hydraulic Line","tags":["Mazda","RX-8","SE3P"],"price":3000,"price_min":3000,"price_max":3000,"available":false,"price_varies":false,"compare_at_price":3000,"compare_at_price_min":3000,"compare_at_price_max":3000,"compare_at_price_varies":false,"variants":[{"id":16883617286,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10448","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Clutch Line for Mazda RX8 SE3P 2003-2012 Braided SS Firesleeved 10448","public_title":null,"options":["Default Title"],"price":3000,"weight":340,"compare_at_price":3000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395684526","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/33466_DIF_10448_FS01-01_2x1446868467563d75f3bab51.jpeg?v=1571609570"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/33466_DIF_10448_FS01-01_2x1446868467563d75f3bab51.jpeg?v=1571609570","options":["Title"],"media":[{"alt":"DIFtech Clutch Line for Mazda RX8 SE3P 2003-2012 Braided SS Firesleeved 10448 - Diftech","id":2200324145215,"position":1,"preview_image":{"aspect_ratio":1.333,"height":480,"width":640,"src":"\/\/diftech.com\/cdn\/shop\/products\/33466_DIF_10448_FS01-01_2x1446868467563d75f3bab51.jpeg?v=1571609570"},"aspect_ratio":1.333,"height":480,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/33466_DIF_10448_FS01-01_2x1446868467563d75f3bab51.jpeg?v=1571609570","width":640}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDIFtech Stainless Steel Braided Clutch Line\u003c\/strong\u003e for the Mazda RX8 chassis. Braided lines improve clutch pedal feel and make the driving sensation more direct. DIF clutch lines are fire sleeved which protects the fluid from exhaust heat and prevents boiling. It also adds a layer of protection against pinching and road debris. If you're doing a clutch job on your RX8, this is a great upgrade!\u003c\/p\u003e\n \u003cp\u003e12.5\" Overall length\u003c\/p\u003e"}

$ 30.00

DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech

Sale Sold Out

DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 {"id":9251598476,"title":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626","handle":"na-nb-miata-extended-top-hat","description":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata 1990-2005, NA or NB chassis\u003c\/li\u003e\n\u003cli\u003eUses stock bushings for ease of install and ride comfort\u003c\/li\u003e\n\u003cli\u003eConverts to accept 60mm linear spring\u003c\/li\u003e\n\u003cli\u003eOne pair fits front or rear\u003c\/li\u003e\n\u003cli\u003eIncrease compression stroke by 1.in (26mm) compared to stock\u003c\/li\u003e\n\u003cli\u003eMachined from 6061-T6 billet aluminum for light weight and high strength\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eTo be used with slip-on threaded collars on stock-type shocks\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended top hats are designed to complete your conversion to an affordable coilover setup on any NA or NB Miata while allowing additional compression stroke for lowered cars. This top hat design integrates a 60mm spring retainer into the hat to allow you to use a linear race spring when using slip-on, threaded collars. Spring isolators can also be used to adapt to a 65mm spring. In addition, the raised design allows the shock body to be tucked higher into the body of the car, allowing more compression before hitting the bump stops. This kit is for use with stock bushings and bump stops, so ride comfort and noise remain unchanged.\u003c\/p\u003e\n\u003cp\u003eSimilar mounts on the market are usually welded steel and have been known to be made to loose tolerances. These billet CNC machined hats offer a clean, professional solution that look great and work as good as they look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNot designed for use with stock or stock-type springs. For use on threaded body shocks or shocks with threaded collars and a 60mm linear race spring.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor use with NA Miata bilstein shocks, use shoulder nut 10621 to reach into the bushing and threads because the threads are not long enough on NA shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum.\u003c\/p\u003e","published_at":"2016-12-21T20:06:08-08:00","created_at":"2016-12-21T20:06:08-08:00","vendor":"DIFtech","type":"Top Hat","tags":["Mazda","Miata MX-5","NA","NB"],"price":16000,"price_min":16000,"price_max":16000,"available":false,"price_varies":false,"compare_at_price":18000,"compare_at_price_min":18000,"compare_at_price_max":18000,"compare_at_price_varies":false,"variants":[{"id":32045258764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10626","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626","public_title":null,"options":["Default Title"],"price":16000,"weight":907,"compare_at_price":18000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395685790","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","options":["Title"],"media":[{"alt":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech","id":2488740905023,"position":1,"preview_image":{"aspect_ratio":1.333,"height":1836,"width":2447,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575"},"aspect_ratio":1.333,"height":1836,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_3c5bd483-bb41-40e5-8714-7f47c7a7d319.jpg?v=1571609575","width":2447},{"alt":"DIFtech Extended Top Hats for Mazda Miata NA NB Pair Budget Coilover 60mm 10626 - Diftech","id":2488741003327,"position":2,"preview_image":{"aspect_ratio":1.333,"height":2220,"width":2959,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575"},"aspect_ratio":1.333,"height":2220,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_37a876bb-3318-452b-845c-08d6831f28c1.jpg?v=1571609575","width":2959}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata 1990-2005, NA or NB chassis\u003c\/li\u003e\n\u003cli\u003eUses stock bushings for ease of install and ride comfort\u003c\/li\u003e\n\u003cli\u003eConverts to accept 60mm linear spring\u003c\/li\u003e\n\u003cli\u003eOne pair fits front or rear\u003c\/li\u003e\n\u003cli\u003eIncrease compression stroke by 1.in (26mm) compared to stock\u003c\/li\u003e\n\u003cli\u003eMachined from 6061-T6 billet aluminum for light weight and high strength\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eTo be used with slip-on threaded collars on stock-type shocks\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended top hats are designed to complete your conversion to an affordable coilover setup on any NA or NB Miata while allowing additional compression stroke for lowered cars. This top hat design integrates a 60mm spring retainer into the hat to allow you to use a linear race spring when using slip-on, threaded collars. Spring isolators can also be used to adapt to a 65mm spring. In addition, the raised design allows the shock body to be tucked higher into the body of the car, allowing more compression before hitting the bump stops. This kit is for use with stock bushings and bump stops, so ride comfort and noise remain unchanged.\u003c\/p\u003e\n\u003cp\u003eSimilar mounts on the market are usually welded steel and have been known to be made to loose tolerances. These billet CNC machined hats offer a clean, professional solution that look great and work as good as they look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNot designed for use with stock or stock-type springs. For use on threaded body shocks or shocks with threaded collars and a 60mm linear race spring.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFor use with NA Miata bilstein shocks, use shoulder nut 10621 to reach into the bushing and threads because the threads are not long enough on NA shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum.\u003c\/p\u003e"}

$ 180.00 $ 160.00

DIFtech Front Brake Lines for Mazda Miata NA NB Stainless Steel 1989-2005 10597 - Diftech

Sold Out

DIFtech Front Brake Lines for Mazda Miata NA NB Stainless Steel 1989-2005 10597 {"id":9251597132,"title":"DIFtech Front Brake Lines for Mazda Miata NA NB Stainless Steel 1989-2005 10597","handle":"miata-89-05-front-ss-brake-line-kit","description":"\u003cp\u003e\u003cstrong\u003eDIFtech front Stainless Steel Brake Line Kit Mazda Miata 89-05\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003eThese DIF brake lines are made in the US to meet strict DOT certifications. Stainless steel brake lines provide improved performance over stock rubber hoses by preventing flexes, which reduces firmness and reaction. Each brake line is made from CNC machined fittings.\u003c\/p\u003e\n \u003cp\u003eEach DIF brake line set also includes all necessary fittings, lines, and hardware to make installation as quick and easy as possible.\u003c\/p\u003e","published_at":"2016-12-21T20:05:59-08:00","created_at":"2016-12-21T20:05:59-08:00","vendor":"DIFtech","type":"Brake Hydraulic Line","tags":["Mazda","Miata MX-5","NA","NB"],"price":5000,"price_min":5000,"price_max":5000,"available":false,"price_varies":false,"compare_at_price":5000,"compare_at_price_min":5000,"compare_at_price_max":5000,"compare_at_price_varies":false,"variants":[{"id":32045257548,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10597","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front Brake Lines for Mazda Miata NA NB Stainless Steel 1989-2005 10597","public_title":null,"options":["Default Title"],"price":5000,"weight":227,"compare_at_price":5000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395685509","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_7262fc84-dd88-46f5-a16e-30777ef6bca7.jpg?v=1571609574"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_7262fc84-dd88-46f5-a16e-30777ef6bca7.jpg?v=1571609574","options":["Title"],"media":[{"alt":"DIFtech Front Brake Lines for Mazda Miata NA NB Stainless Steel 1989-2005 10597 - Diftech","id":3098714734655,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1574,"width":2101,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_7262fc84-dd88-46f5-a16e-30777ef6bca7.jpg?v=1571609574"},"aspect_ratio":1.335,"height":1574,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_7262fc84-dd88-46f5-a16e-30777ef6bca7.jpg?v=1571609574","width":2101}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eDIFtech front Stainless Steel Brake Line Kit Mazda Miata 89-05\u003c\/strong\u003e\u003c\/p\u003e\n \u003cp\u003eThese DIF brake lines are made in the US to meet strict DOT certifications. Stainless steel brake lines provide improved performance over stock rubber hoses by preventing flexes, which reduces firmness and reaction. Each brake line is made from CNC machined fittings.\u003c\/p\u003e\n \u003cp\u003eEach DIF brake line set also includes all necessary fittings, lines, and hardware to make installation as quick and easy as possible.\u003c\/p\u003e"}

$ 50.00

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair AST Xida 10698-08 - Diftech

Sold Out

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair AST Xida 10698-08 {"id":1776515383359,"title":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair AST Xida 10698-08","handle":"diftech-top-hat-coilover-1-5-inch-tall-for-mazda-mx5-miata-na-nb-chassis-ast-gen1-xida-10698-08","description":"\u003cul\u003e\n \u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n \u003cli\u003eIncludes install kit for AST Gen1 Xida shocks\u003c\/li\u003e\n \u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n \u003cli\u003eSold as pair\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on AST Xida shocks running slip-on coilover sleeves (not included). This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n \u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n \u003cp\u003eNot designed for use with stock or stock-type springs. This kit specifically for AST shocks with coilover sleeves and 2.25\" diameter springs. \u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. AST Gen1 Xida install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/p\u003e","published_at":"2019-05-06T11:18:39-07:00","created_at":"2019-04-04T15:16:59-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Mazda","Miata MX-5","NA","NB"],"price":29000,"price_min":29000,"price_max":29000,"available":false,"price_varies":false,"compare_at_price":29000,"compare_at_price_min":29000,"compare_at_price_max":29000,"compare_at_price_varies":false,"variants":[{"id":14552186159167,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10698-08","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair AST Xida 10698-08","public_title":null,"options":["Default Title"],"price":29000,"weight":1361,"compare_at_price":29000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395688906","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_38c8a9de-2534-4424-9f72-be05dbcfebb9.jpg?v=1571609593"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_38c8a9de-2534-4424-9f72-be05dbcfebb9.jpg?v=1571609593","options":["Title"],"media":[{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair AST Xida 10698-08 - Diftech","id":3616651444287,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1931,"width":2578,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_38c8a9de-2534-4424-9f72-be05dbcfebb9.jpg?v=1571609593"},"aspect_ratio":1.335,"height":1931,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_38c8a9de-2534-4424-9f72-be05dbcfebb9.jpg?v=1571609593","width":2578}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n \u003cli\u003eIncludes install kit for AST Gen1 Xida shocks\u003c\/li\u003e\n \u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n \u003cli\u003eSold as pair\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on AST Xida shocks running slip-on coilover sleeves (not included). This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n \u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n \u003cp\u003eNot designed for use with stock or stock-type springs. This kit specifically for AST shocks with coilover sleeves and 2.25\" diameter springs. \u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. AST Gen1 Xida install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/p\u003e"}

$ 290.00

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11 - Diftech

Sold Out

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11 {"id":1495803854911,"title":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11","handle":"diftech-top-hat-coilover-1-5-inch-tall-for-mazda-mx5-miata-na-nb-chassis-bilstein-b6-hd-10698-11","description":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n\u003cli\u003eIncludes install kit for Bilstein B6 HD shocks\u003c\/li\u003e\n\u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n\u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n\u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n\u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n\u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n\u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on Bilstein HD shocks running slip-on coilover sleeves (not included). This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n\u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n\u003cp\u003eNot designed for use with stock or stock-type springs. This kit specifically for Bilstein shocks with coilover sleeves and 2.5\" diameter springs.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Bilstein B6 install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/p\u003e","published_at":"2019-05-06T11:18:41-07:00","created_at":"2018-09-18T11:01:16-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Mazda","Miata MX-5","NA","NB"],"price":29000,"price_min":29000,"price_max":29000,"available":false,"price_varies":false,"compare_at_price":29000,"compare_at_price_min":29000,"compare_at_price_max":29000,"compare_at_price_varies":false,"variants":[{"id":13211521384511,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10698-11","requires_shipping":true,"taxable":true,"featured_image":{"id":4132104863807,"product_id":1495803854911,"position":1,"created_at":"2018-09-18T11:01:18-07:00","updated_at":"2019-10-20T15:13:01-07:00","alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11 - Diftech","width":2578,"height":1931,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581","variant_ids":[13211521384511]},"available":false,"name":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11","public_title":null,"options":["Default Title"],"price":29000,"weight":1361,"compare_at_price":29000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687824","featured_media":{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11 - Diftech","id":3273318498367,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1931,"width":2578,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581","options":["Title"],"media":[{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Bilstein B6 10698-11 - Diftech","id":3273318498367,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1931,"width":2578,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581"},"aspect_ratio":1.335,"height":1931,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_14e1f893-a4d5-4c4c-899d-3c369e24def9.jpg?v=1571609581","width":2578}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n\u003cli\u003eIncludes install kit for Bilstein B6 HD shocks\u003c\/li\u003e\n\u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n\u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n\u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n\u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n\u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n\u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on Bilstein HD shocks running slip-on coilover sleeves (not included). This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n\u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n\u003cp\u003eNot designed for use with stock or stock-type springs. This kit specifically for Bilstein shocks with coilover sleeves and 2.5\" diameter springs.\u003c\/p\u003e\n\u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. Bilstein B6 install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/p\u003e"}

$ 290.00

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15 - Diftech

Sold Out

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15 {"id":4330137780287,"title":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15","handle":"diftech-front-or-rear-shock-hats-for-mazda-miata-na-nb-pair-mcs-remote-10698-15","description":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n\u003cli\u003eIncludes install kit for MCS shocks with remote reserviors\u003c\/li\u003e\n\u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n\u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n\u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n\u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n\u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n\u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e These extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on MCS dual adjustable shocks running remote canisters. This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Non-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eNot designed for use with stock or stock-type springs. This kit specifically for MCS Remote shocks with and 2.25\" diameter springs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. MCS install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-10-28T13:17:57-07:00","created_at":"2019-10-28T13:17:57-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Mazda","Miata MX-5","NA","NB"],"price":29000,"price_min":29000,"price_max":29000,"available":false,"price_varies":false,"compare_at_price":29000,"compare_at_price_min":29000,"compare_at_price_max":29000,"compare_at_price_varies":false,"variants":[{"id":31060165951551,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10698-15","requires_shipping":true,"taxable":true,"featured_image":{"id":13333806088255,"product_id":4330137780287,"position":1,"created_at":"2019-10-28T13:17:59-07:00","updated_at":"2020-01-23T04:21:06-08:00","alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15 - Diftech","width":2578,"height":1931,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066","variant_ids":[31060165951551]},"available":false,"name":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15","public_title":null,"options":["Default Title"],"price":29000,"weight":1361,"compare_at_price":29000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395689194","featured_media":{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15 - Diftech","id":5499968225343,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1931,"width":2578,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066"}},"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066","options":["Title"],"media":[{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair MCS Remote 10698-15 - Diftech","id":5499968225343,"position":1,"preview_image":{"aspect_ratio":1.335,"height":1931,"width":2578,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066"},"aspect_ratio":1.335,"height":1931,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_e1be1b69-d23e-4922-92e7-7612206499c2.jpg?v=1579782066","width":2578}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n\u003cli\u003eIncludes install kit for MCS shocks with remote reserviors\u003c\/li\u003e\n\u003cli\u003e1.5\" rise hat\u003c\/li\u003e\n\u003cli\u003eSold as pair\u003c\/li\u003e\n\u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n\u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n\u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n\u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n\u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n\u003cli\u003eCustom install kits available (email us for your custom application)\u003c\/li\u003e\n\u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n\u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e These extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 1.5\" extension for use on MCS dual adjustable shocks running remote canisters. This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Non-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eNot designed for use with stock or stock-type springs. This kit specifically for MCS Remote shocks with and 2.25\" diameter springs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. MCS install kit included. Customers can also email us for custom install kits for specific racing applications.\u003c\/span\u003e\u003c\/p\u003e"}

$ 290.00

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Penske 8300 10697-10 - Diftech

Sold Out

DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Penske 8300 10697-10 {"id":1425795022911,"title":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Penske 8300 10697-10","handle":"diftech-top-hat-coilover-2-inch-tall-for-mazda-miata-mx5-na-nb-front-or-rear-penske-8300-10697","description":"\u003cul\u003e\n \u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n \u003cli\u003eFits Penske 8300 dampers with 5\/8-18 threaded shaft\u003c\/li\u003e\n \u003cli\u003e2\" high-rise hat for Penske or other extension type dampers\u003c\/li\u003e\n \u003cli\u003eSold as pair\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 2\" extension for Penske shocks, or other dampers that use a similar shaft-extension type design. For most other dampers, search 10698. This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n \u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. For use with Penske spring retainers. Customers can email us for other custom install kits for specific racing applications.\u003c\/p\u003e","published_at":"2019-05-06T11:18:37-07:00","created_at":"2018-08-20T13:20:24-07:00","vendor":"DIFtech","type":"Top Hat Kit","tags":["Mazda","Miata MX-5","NA","NB"],"price":30000,"price_min":30000,"price_max":30000,"available":false,"price_varies":false,"compare_at_price":30000,"compare_at_price_min":30000,"compare_at_price_max":30000,"compare_at_price_varies":false,"variants":[{"id":12886554673215,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"10697-10","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Penske 8300 10697-10","public_title":null,"options":["Default Title"],"price":30000,"weight":1361,"compare_at_price":30000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"617395687725","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/diftech.com\/cdn\/shop\/products\/image_54164638-fe9d-4463-ba95-e076ec524e4e.jpg?v=1571609581"],"featured_image":"\/\/diftech.com\/cdn\/shop\/products\/image_54164638-fe9d-4463-ba95-e076ec524e4e.jpg?v=1571609581","options":["Title"],"media":[{"alt":"DIFtech Front or Rear Shock Hats for Mazda Miata NA NB pair Penske 8300 10697-10 - Diftech","id":3190989324351,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1574,"width":2100,"src":"\/\/diftech.com\/cdn\/shop\/products\/image_54164638-fe9d-4463-ba95-e076ec524e4e.jpg?v=1571609581"},"aspect_ratio":1.334,"height":1574,"media_type":"image","src":"\/\/diftech.com\/cdn\/shop\/products\/image_54164638-fe9d-4463-ba95-e076ec524e4e.jpg?v=1571609581","width":2100}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n \u003cli\u003eFits Mazda Miata MX-5 NA or NB chassis - front or rear\u003c\/li\u003e\n \u003cli\u003eFits Penske 8300 dampers with 5\/8-18 threaded shaft\u003c\/li\u003e\n \u003cli\u003e2\" high-rise hat for Penske or other extension type dampers\u003c\/li\u003e\n \u003cli\u003eSold as pair\u003c\/li\u003e\n \u003cli\u003eCoaxial design for increased traction and reduced shock blind\u003c\/li\u003e\n \u003cli\u003eHat movement is independent of spring compression axis\u003c\/li\u003e\n \u003cli\u003eSpherical bearing to eliminate bushing deflection under load\u003c\/li\u003e\n \u003cli\u003e6061-T6 aerospace aluminum alloy for extra rigidity and reduced weight\u003c\/li\u003e\n \u003cli\u003eFK wide-series 5\/8\" high-quality spherical bearings\u003c\/li\u003e\n \u003cli\u003eInstall kit required (available for each shock brand)\u003c\/li\u003e\n \u003cli\u003eCustom install kit available (email us for your custom application)\u003c\/li\u003e\n \u003cli\u003eAnodized black finish for durability\u003c\/li\u003e\n \u003cli\u003eEngineered, tested, and manufactured in the United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 2\" extension for Penske shocks, or other dampers that use a similar shaft-extension type design. For most other dampers, search 10698. This top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.\u003c\/p\u003e\n \u003cp\u003eNon-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.\u003c\/p\u003e\n \u003cp\u003eMade in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. For use with Penske spring retainers. Customers can email us for other custom install kits for specific racing applications.\u003c\/p\u003e"}

$ 300.00

Returns Policy

Shipping

Customer Reviews

Other products that may fit your vehicle.

Recently Viewed Products