Loading...
Home>Engine>Coolant & Oil Kits>DIF S14 SR20DET Premium Bottom Mount Turbo Coolant & Oil Lines Kit / Restrictor 0.032" & 0.062"

View larger image

DIF S14 SR20DET Premium Bottom Mount Turbo Coolant & Oil Lines Kit / Restrictor 0.032" & 0.062"

CODE: 10048

Price: $230.00

Out-of-stock

DIF 10048 S14 SR20DET Premium Bottom Mount Turbo Coolant & Oil Lines Kit is a direct drop-in upgrade for the hard lines that come with sr20det engine. Stock hard lines tend to crack and leak and are very difficult to work with due to the inherent rigidity of the material. Because the hard lines do not give, it may cause the installer to mis-thread the banjo bolts into the block and messing up the fragile aluminum treads. DIF turbo lines are made from a seamless synthetic CPE inner with an integral stainless steel braid and a high tensile stainless steel outer braid which allows the line to be flexible yet still strong. This results in lines that are much easier to install and maintain. The original coolant line banjo bolts are swapped for AN to metric adapter fittings for a better seal. This is a highly recommended upgrade for everyone planning to work on their turbo.

This kit includes everything you need to completely replace the stock lines for a easy bolt-on installation. 2 restrictors are included in this kit for your convenience. (.032 in / 0.8mm) and  (.062 in / 1.6 mm) restrictors can be used for a wide variety of turbos including ball bearing and non ball bearing turbos. Forged fittings are used on this kit for better clearances and extreme durability.

Coolant Feed & Return Line Feature
  • Goodridge 336 FORGED Cutter Design Hose Ends w/ 360 Degree Swivel
  • Goodridge Stainless Steel Braided Lines w/ 6000psi Burst Pressure
  • Goodridge Premium Quality Anodized Aluminum Fittings
  • Fireproof Silicone Sleeve for up to 2000 Degrees F Flame Protection
  • Premium Copper Sealing Washers
  • Pressure Tested

Oil Feed Line Features
  • Goodridge Premium Steel Crimp Fittings
  • DOT Approved Teflon SS Braided Lines w/ 12750 psi Burst Pressure
  • Goodridge Banjo Bolts w/ Premium Copper Sealing Washers
  • .032 in / 0.8mm .062 in / 1.6 mm Stainless Steel Oil Restrictor Fitting
  • Fireproof Silicone Sleeve for up to 2000 Degrees F Flame Protection
  • Premium Copper Sealing Washers
  • Pressure Tested

Categories